Take a clean, dry paper towel and rub the stained area while heating the area with a blow dryer.
Source: My own experiment.
By Rochelle from Blue Springs, MO
Does anyone know how I can save my desk? About a month ago it was sprayed with straight 91% isopropyl alcohol. I used hot soapy water right after it happened, but it didn't help at all.
And now it's starting to look like it's getting speckles. If anyone has any ideas I would be extremely grateful.
How do I get out a small stain left by isopropyl alcohol on my wood table?
John from FL
Have you tried Olde English scratch remover and cover? It might cover up the stain, probably won't remove it but it should hide it pretty well. You will just have to touch it up from time to time.
Toothpaste does the magic!
Put some toothpaste on a clean dry piece of cloth and rub in the stain..., You will be amazed!!I used colgate.
I rubbed some coconut oil into the wood and the white stains appear to be gone.
How do I fix this without ruining the wood?
Your table looks like real wood and not veneer but be careful as the solution for the two finishes may be different.
The most recommended solution is to use a damp cloth with a small dab of white toothpaste (not gel) and rub gently. Do a little at a time to see if it is working.
Some people have had good results using furniture polish and a blow dryer (I've never tried this).
I have used Olde English scratch remover and covered the spot using a soft white cloth. This product comes in several colors so you can match your wood.
I would definitely try the toothpaste remedy first and be sure to wait an hour or so between trying different solutions.
Let us know if any thing (method?) works for you.
Cooking oil has always worked for me in cases like this. You can take a few drop of cooking oil and a clean white cloth to rub it in with. Just add a few drop of cooking oil on the spot and take your cloth and gently rub the oil into the spot on the table.
How can I remove alcohol stains (whitening) from a wood dresser?
If it is a light stain, and didnt go too deep, you can mix ground pumice stone and linseed oil into a purée. Use a fine steel wool to apply, and then polish with furniture polish.
You can try using a furnisher polish and blow dryer. You may also try toothpaste.
Hello. I have a bare walnut butcher block desk top that I am getting ready to finish with Daly's Benmatte tung oil. It was my first time using a tack cloth and it left a sticky/oily residue on the surface of the wood after I sanded it. I then used 90% rubbing alcohol to remove the wax spots from the tack cloth. It removed most of the spots but at some point I must have splattered the surface with the alcohol leaving a white alcohol stain.
Two questions:
1. How do I get rid of the residue from the tack cloth that still looks oily in some spots?
2. How do I get rid of the white-ish stain splatter stain left from the rubbing alcohol? Should I re-sand the top surface to remove both issues?
Your help is greatly appreciated!
You could try Mineral Spirits. Use a clean clothe , and dampen spirits. Rub in a circular motion over the stain, make sure you do not soak the wood. This works well on lighter stains.
I spilled rubbing alcohol on my dresser the other day. I tried rubbing with soap and water, but the white stain is still on my dresser. It's an antique dresser. What do I do to get that white stain off of my dresser? Thank you.
I'm not sure how you would remove it, maybe goo gone? But most stores actually sell these pens that come in a variety of stain colors (got mine at Walmart) you can use over the stain possibly.
I will try to give you info re limited info you supplied. Was the dresser wood? If it was made before 1910 the protective coating would not have been lacquer but either varnish or shellac. Do not use soap and water.
Did the alcohol eat thru the protective coating? Are you seeing a spot where the finish was removed? Use a soft rag like a washcloth - dampen a corner and use a little dab of white toothpaste - not a gel and rub gently. This is one of the mildest abrasives you an use. Do a little at a time to see if it is working.
If the coating has been completely removed and the bare wood is showing you may need to refinish the top. Hope his helps.
I use furnished polish and blow dryer it I worked thank God
Thank u for this info. My son was doing a chemistry project and spilled rubbing alcohol all over my wood dining room table. I used the toothpaste and it worked well enough so u don't see the white spots. I am going to try this process again tomorrow.
Thank you so much! I thought I had damaged a coffee table beyond repair and your suggestion worked. Thank you again
I have a ring on my coffee table from rubbing alcohol how Can I fix this
Wow< I'm so glad someone knows all this stuff, I tried the toothpaste, and voila the two alcohol spots are gone from an antique dresser that I thought was ruined, I can't thank you enough!!!!!
My grandson spilt some hand sanitizer on our coffee table and we didn't discover it until we saw the white streaks and spots. I tried your suggestion as it seemed the least invasive and it worked like a charm. Used Aquafresh and it worked great, you can't tell anything ever happened.
I used a wax scratch pen for cars. I was experimenting, and it actually worked! The brand I have is turtle, but you can probably get other cheap ones from autozone.
You are a star. Took cloth off my lovely walnut table to find stain around where placemat would have been when last had friends in.
I decided it was probably alcohol so did your toothpaste tip. it has worked a treat.
Decided to get glass top for table when I can!!
Cannot thank you enough.
Christine
Try toothpaste and baking soda. If you keep rubbing the toothpaste and baking soda will combine to form a sand like texture. Keep scrubbing and the stain should come out.
