social

Bed Making Tips

July 15, 2011

Girl Making Her BedI love it when the air around me smells fragrant. Here's a tip for good smelling bed linens. Find a fabric softener sheet whose scent you love, and cut it in half. Put one or both halves between the pillowcase and the bed pillow (one half on each side of the pillow). Every time you put your head on the pillow, you smell the fragrance just a little. It is not overwhelming. My guests often comment how nice it smells on the guest pillows.

Advertisement

By Nicki Rippeteau from Warrensburg, MO

 
Read More Comments

Questions

Here are the questions asked by community members. Read on to see the answers provided by the ThriftyFun community.

June 21, 2016

I have a king size blanket, recently purchased from JCP. All the seams look the same. How do I tell what goes at the top and what goes at the bottom for a perfect fit?


Answers

June 23, 20160 found this helpful
Best Answer

Lay it out on the bed one direction, then rotate it putting what was on the side on the top. Decide which way you think it fits best, then sew a small colored ribbon in the bottom right corner, or even both bottom corners - now when you have to put it back on the bed, you know exactly which way it goes.

 
Answer this Question

December 22, 2008

I've been wanting to redecorate my room for a while now, but have hesitated because I didn't want to spend money on a new bedspread. The other night I stayed in a hotel where they "triple sheeted" my bed and I enjoyed how that felt and looked. Is there a proper way to make a bed this way? Or does anyone have other ideas?



Michelle

Answers


Bronze Feedback Medal for All Time! 107 Feedbacks
December 22, 20080 found this helpful

Why would anyone triple sheet a bed? Especialy a Hotel?? Do they think the two underneath stay clean? I think not.

Advertisement

I wouldnt want to sleep on a sheet that was under one somone er.. two used the night before.. yuk!!

 
By Marie (Guest Post)
December 26, 20080 found this helpful

I don't think the last post was meant to be funny but ... lol

A triple sheeted bed is a fitting sheet, sheet and then sheet over the top blanket. The two upper work similar to a duvet cover so instead of buying an expensive new bedspread, you can cover w/ a much cheaper sheet! To get a cool patter you could buy fabric instead of a sheet.

And an additional to the last comment - triple sheeting can be much more sanitary for hotels since some hotels do not require laundering of bedspreads after each guest, only sheets!

 
By Michelle (Guest Post)
December 27, 20080 found this helpful

Thank you, that was so much more helpful!

 
By velsgal (Guest Post)
December 28, 20080 found this helpful

This isn't really an answer to your question but it might help you redecorate your bedroom. Try the craigslist.org in your area. I have found incredible deals..for example a king size flannel sheet set that had been slept on once for $15.00 because they didn't like them.

Advertisement


PS. I'm glad to know how to triple sheet as well. It does have a nice feel to it. Blessings!

 
December 29, 20080 found this helpful

I can see the idea, but why not just sew the two sheets together and make the duvet? I bartered and got a seamstress to make my duvet. Now we use just the fitted sheet with a comforter inside the duvet. We wash the fitted sheet and the duvet. It is so much easier to make the bed. You just throw the duvet on the bed, no tucking sheets and blankets, etc. And if you travel much, I would invest in a sleep bag that you carry with you to sleep in a motel.

 
December 29, 20080 found this helpful

My mother does this.

Here's how:

1)Put the fitted sheet and the flat sheet on the bed the normal way.

2)Put the blanket on top of the flat sheet but don't turn the flat sheet down yet.

Advertisement

3)Put the second flat sheet on top of the blanket with the top of the sheet even with the top of the blanket.

4)THEN turn the top of the first flat sheet down over both the blanket and the second fitted sheet.

5)Tuck in the sheets/blankets at the bottom of the bed.

 
By Ella (Guest Post)
December 30, 20080 found this helpful

If I understand this 'triple sheeting' thing, I agree with Ariela,YUK!

 
January 1, 20090 found this helpful

What color combos do you use?

 
November 5, 20090 found this helpful

I am sorry guys but I had to read this no less than four times to understand the final step! Let's see. When all is said and done I should have one solid piece right?

Advertisement

Some of my queen sheets are rather big when I bring my fitted sheet up and over the third sheet will this not be lumpy? Thanks, Carla

 

Bronze Feedback Medal for All Time! 107 Feedbacks
November 5, 20090 found this helpful

Man, I don't know why I didn't get it the first time I read it. But Katie A's post set it in my head. A friend made a duvet
cover using sheets. She put an old blanket inside 2 sheets but instead of sewing it closed she sewed on buttons; made it easy to launder. But she didn't tack the blanket in place so I don't know what keeps the blanket from bunching up.

 
January 8, 20100 found this helpful

I work at a hotel I am a housekeeper and yes triple sheeting is nice but takes a lot longer then the usual bedspread anyways put your fitted sheet on tight then your flat sheet to meet at the top of the bed then your blanket about 12 inches or more if you prefer down from the flt sheet then put your next flat sheet about 2inches over the blanket fold over the the top flat sheet then fold bottom flat over blanket and sheet tuck top sides in. then go to bottom of bed tuck in then you do all sides then put your decorative blanket folded at the foot of the bed. I do this on my bed too looks so neat and feels great.

 
Answer this Question

December 31, 2011

I have one of those foam bed toppers on my bed. After I put the sheet on, the foam wrinkles up, almost folds in several different places. Any ideas on how to keep it flat?

By Tanya

Answers


Bronze Post Medal for All Time! 148 Posts
January 3, 20120 found this helpful

Our Memory Foam topper that our daughter got us for Christmas a couple years ago, came with a knit Zippered cover, and we don't that problem. It zips on 3 sides so is very easy to remove for laundering, and when you replace it in the cover, you just lay it in, and pull it gently around the edges to make sure it is nice and flat before you zip it up. I don't know whether you can buy just the cover or not. Our topper with cover came from Kohl's. It might also have something to do with the thickness of your topper.

Advertisement


Harlean from Arkansas

 

Gold Post Medal for All Time! 969 Posts
January 12, 20120 found this helpful

A mattress cover might be the answer, too. I hope that helps.

 

Bronze Feedback Medal for All Time! 226 Feedbacks
January 12, 20120 found this helpful

Could it be too big, with the sheets causing it to buckle? If it is perhaps you can trim it to fit better.

 

Silver Feedback Medal for All Time! 282 Feedbacks
January 14, 20120 found this helpful

You could sew (hand or machine) elastic strips across the corners and pull the strips under the mattress to keep it in place.

Or you could make something like a duvet cover using flat bed sheets to enclose the topper, attaching the elastic strips to the cover so that you could pull the strips under the mattress.

There are commercially made straps, too, meant for attaching to fitted and flat sheets to keep them in place. Those straps feature a gripper attachment something like a suspender or garter belt grip.

 
Answer this Question

May 12, 2014

My king pillows are too short for my king shams. Any ideas on how to fill out the rest of the sham?

By Wanda

Answers

May 13, 20140 found this helpful

Hello I find using two pillows works for me, but I am from England. The pillows are a lot smaller, but we can get large pillow shams.

 

Bronze Feedback Medal for All Time! 226 Feedbacks
May 13, 20140 found this helpful

You could make new pillows to fit the shams. Measure the shams and cut fabric to make pillows the same size as the shams. I pick up top quality sheets at the Goodwill for this. Sew them up and leave a 5 inch opening to stuff them. You can stuff them with the stuffing from your pillows that were too small. You may need a bit extra stuffing but it shouldn't be too costly. Stitch up the opening you used to stuff the pillows and that's it. It shouldn't cost much more than $10.

 
May 14, 20140 found this helpful

I just tuck the pillow case down into the open end. It stays very well and makes the case look fitted.

 
Answer this Question
<< First< Previous
Categories
Home and Garden Cleaning BedroomsOctober 17, 2011
Pages
More
👒
Mother's Day Ideas!
🌻
Gardening
🐰
Easter Ideas!
Facebook
Pinterest
YouTube
Instagram
Categories
Better LivingBudget & FinanceBusiness and LegalComputersConsumer AdviceCoronavirusCraftsEducationEntertainmentFood and RecipesHealth & BeautyHolidays and PartiesHome and GardenMake Your OwnOrganizingParentingPetsPhotosTravel and RecreationWeddings
Published by ThriftyFun.
Desktop Page | View Mobile
Disclaimer | Privacy Policy | Contact Us
Generated 2024-03-28 06:12:33 in 5 secs. ⛅️️
© 1997-2024 by Cumuli, Inc. All Rights Reserved.
https://www.thriftyfun.com/tf/CleaningGroup/Bedrooms/Bed-Making-Tips.html