For my queen size bed I found that the corners of the sheets were always coming loose during the night. So I go some of these elastic things that have the clips on either end that you clip on the sheet at the corners. Well this didn't really do the trick either.
So I took and cut the clips off leaving just about 2 inches of the elastic still attached to each one. I ended up with 8 clips. Then I sewed the clip to the bottom side of the mattress, going in about 4 inches or so with each one. I put them at about the same spots where they were before I cut the clips (either side of each corner).
Now when I put the fitted sheet on I clip it to each clip. It holds the sheet in place nicely till I'm ready to wash and change sheets. No more bunched up bottom sheets!
By Cricket from Parkton, NC
There are a few good suggestions on this page for keeping your bedding looking nice. Whether the issue is flat pillows or pillows that won't stay in place as arranged.
How can you attach a sheet or blanket to the foot of a bed so that it does not ride up? Yes, I have tucked it underneath the mattress and also have used those corner snap things, but it's not working out that great.
I need some handy proven to work tips.Tie a knot at the end of the flat sheet and tuck it into the fitted sheet
If the sheets just ride up for no reason, this may work for you, but if you are a super restless sleeper and tend to move your legs a lot and that is why the sheets runch up, DON'T try this method. It worked on the side one who sleeps like a log, but the restless side, it tore....
I used the super heavy duty 4 inch metal skirt safety pins after tucking (pinned 1 top and 1 bottom on the front of the bed, top and bottom on the side of the bed) and it held it fine on the log sleepers's side. On my side (I am a restless sleeper) it caused the sheets and the mattress cover to tear as I literally kicked the closed pins out on one side. I was not happy.
I finally gave up and just deal with the riding up on my side, sometimes getting up in the middle of the night to fix it...so if there is a better solution out there, I am so up for it!
As the pillow top mattress have become more popular, it may be difficult to keep your older linens in place. This is a page about keeping sheets on a mattress.
I am a very restless sleeper and every morning I have to remake the bed completely, i.e. rearrange all the sheets. I tried the sheet strap things from a store and they are not any help.
Buy suspenders like the kind men use to hold up their pants. Sew buttons on your bottom sheet, one on each corner. Put the suspenders between your box spring and mattress and attach each of the ends to a button as you're making the bed.
I have a memory foam mattress, and I cannot keep the sheets and bedclothes from sliding to the left. Every morning, I have to totally remake the bed, because the sheets and everything else wind up near or on the floor.
I have tried pinning them down, and making an elastic band to fit around the top and bottom, and still I keep having this problem. Does anyone else have this problem with a memory foam mattress, and know what I can do about it? It has just about ruined the looks of my mattress. (I can't take the mattress cover off and wash it. )
This may work , you can give it a try anyway - do you know the kind of kitchen shelf liner -it"s kind of rubbery-soft feeling or what you can put under an area rug to keep it from sliding?
Think you can also get this in "big box" tool-type stores, to put under power tools to keep them from sliding around (may be called a router mat). I have this between box spring & mattress to keep it from moving. Hope it helps ! :-)
What can I get or use to keep the fitted sheet on a hospital bed?
By Twyla from Muskogee, OK
Purchased at family dollar, I got a package of four elastic straps with clips (like to hold up stockings) on each end one strap for each corner to pull the sheet tighter. The package was about $2.
The elastic on my bottom sheets is not keeping the corners tight and in place. I wake up in the morning and the bedding is undone. Any suggestions to keep the corners tightly held?
I always sew a strip of elastic diagonally across the corners of my sheets. If you don't sew or if you sew but don't have a sewing machine these can be held in place by small safety pins. It keeps them in place. I have noticed the new pillow top mattresses don't do well with my old fitted sheets. They are still good so I used elastic to hold them in place rather than toss them.
You can also try old suspenders. Just clip them on each corner. It does take large suspenders to do this, but works great. Look for them at yard sales or thrift stores.
You can get those stretch elastic strips that have clips on the ends of them in a package of 4 at the dollar stores and at walmart. They're used exactly for this purpose, to hold sheets, mattress pads, etc. on the corners underneath the mattress.
I use them on all 3 of my new beds because the depth of the mattress is too deep for the older sheets that I have. I sure can't afford to buy all new sheets and those little sheet clips work like a charm.
I have the same problem. I use garter clips. they are made especially to keep sheets in place.
I already posted my hint but I'll copy it here. To keep your bedding from falling on the floor, and making the bed in the morning a snap, just use sock tape (clear, heavy plasic tape used by hockey players to keep their hockey socks up) on the two bottom corners of the covers. Start the tape on the top and wrap it straight down, lift the corner of the mattress and bring it up the other side to the top. I tape the mattress cover on all 4 corners to keep it snug and then tape the bottom corners of the cover sheet and quilt. In the morning all you have to do is pull your covers up.
How frustrating. Try the clips, they work. Some mattresses need deeper sheets.
To keep your bedding from falling on the floor, and making the bed in the morning a snap, just use sock tape (used by hockey players to keep their socks up) on the two bottom corners of the covers.
