I can see water from the fill line going into the ice maker. The water just pours into the icemaker and then instantly into the freeezer to the floor. What causes this?
By Robert
Are you sure it is your icemaker? We had a problem with ice forming on the bottom of our freezer and finally figured out it was too much stuff in our freezer compartment. When we cleaned out most of the frozen goods it has not leaked again. Just a thought!
It sounds like the fill valve is no longer functioning. They are easy to replace though. Find the part number for your refrigerator and order one. To replace, unplug the unit and turn off the water supply. Take the rear cover off of the refrigerator and locate the valve(See where the water supply line enters).
Could be that the size/adjust screw was moved? If so turn screw to minus - should be clockwise. If not try trouble shooting fill valve...
My leak I recently repaired was the fill tube through the back of freezer is not covered on top. More of a trough. It was splashing out of tube when filling ice tray. I used a 1" heat shrink tubing and completely enclosed tube. No more leaks and no more frozen fan in freezer
My leak I recently repaired was the fill tube through the back of freezer is not covered on top. More of a trough. It was splashing out of tube when filling ice tray.
ThriftyFun is one of the longest running frugal living communities on the Internet. These are archives of older discussions.
My ice maker drips water from around the control box whether it is on or off. I have removed it and ordered a new one, but am having second thoughts. Any ideas? Thank you.
We have a Kenmore Refrigerator, model 10674262402, with top mount freezer. For the past 2 years, spring through late summer, the ice maker leaks
My Kenmore ice maker works, but water drips out the ice tray in the front and freezes into a block.