Get Gorilla Glue, you can find it anywhere. Get a piece of fabric like a T-shirt. Cut it into small squares. Deflate the air mattress in this process and know where your pinhole is! Put Gorilla Glue on the felt and then on the fabric. Push it on to the hole. Then get a hair dryer, keep a little far away on warm for 2 minutes. Let it dry 3 to 4 hours. Fill your bed up and it's done.
Hope I helped someone, good luck!
Does anyone know how to patch a full size inflatable bed mattress successfully?
I have a fairly cheap air mattress. The one I have has a leaking valve, the large plastic outlet valve. The valve cover turns and instead of locking, keeps turning and the air escapes from this loose fitting.
I am using an air mattress for a bed until they can solve a medical issue. I will blow the air mattress up each evening, and in the morning it is softer.
I have an Aero mattress and had a hole in it. I had a bicycle patch on it and it seemed to work, but now my mattress seems to have a slow leak. I tried the soapy water in my spray bottle, but didn't see any bubbles. I can still see the slit under the plastic patch.
I have an Aerobed with a hole in the seam. I do have the repair kit, but this will not stick to the "material" side. The leak is not on the bottom that has vinyl
By Diane from St. Joseph, MO
Use LoctiteEpoxy. It works wonders. I found it in the glue section at Walmart, CVS and Target. Simply use the path that came with the air mattress or cut a portion from an old useless air mattress. Apply the Epoxy to the patch and place over the hole.
I have an air mattress with a hole and am trying to use vinyl cement to fix, well patch the hole. The cement I have is not in it's package so I had to use the this other glue, but it doesn't work.
I have an Ozark Trail air mattress that will not hold air. Is there someplace I can take to have it checked out? I live in Wisconsin, the closest city would be Marshfield, Wisconsin. I could also go to Rapids or Eau Claire.
The mattress is a queen size with a frame.
By Karen
Air up the mattress find and mark any holes you find with blk marker then repair the hole yourself with pool patches. They worked beautiful for me and came in sheets so I could cut the size I needed.
We have had Ozark Trail air matresses before and they used to come with a patch kit. If ours started leaking, my husband would take it outside and put it section by section into a large plastic storage tote of water with a little dish soap in it (it needs to be at least partially blown up for this). Squeeze each section while it's being held underwater. If you see bubbles coming from it anywhere, there's your leak. Just patch it with the patch kit. If you don't have a patch kit, you can buy a bicycle tire patch kit.
Pat T in Ocala
We have an air mattress with a leak somewhere. Where do we get repair kits? I have already used the one that was included when we purchased it.
By Judy
Try using a bike tire patch. You can get those for around $2-5 at almost any bike shop locally.
My air mattress is leaking air, but I can't find a hole anywhere! I think it may be the built-in pump. I can hear a hard piece sliding around inside my air bed, and thinking maybe the pump broke off inside? My mattress will fill up and hold air, but it leaks rapidly. I have to add air every hour to keep from sinking to the floor by morning.
Has anyone had this issue or know how to fix it? Please advise!
By Nicole
I have the very same issue. My airbed is fine when I go to sleep. But it deflates and I end up like a hotdog in a bun, with the mattress around me and I'm on the floor.
What do I use for a hole in an air mattress?
By BV from OK
Use a patch and cement for bicycle tubes. they are designed to hold under high air pressure. Make sure to press the patch on well - the cement is usually a kind of contact cement, so follow the instructions carefully.
This page is about finding leaks in an air mattress. It can be challenge to determine where the holes are, when an air mattress deflates itself.
This is a page about finding replacement caps for your air mattress. An air mattress without its valve cap is not very useful.