I have a 10 year old Poulan 42 inch 17.5 HP riding mower. A local mechanic had just replaced the carburetor and drive belt. When I got the mower back, I noticed it was much more difficult to stop. I had to throttle down (which I never had to do before). Braking gradually got worse.
Now, a month later, I can only stop the mower by pulling out the key. Also, it will only shift gears when off. It will not shift gears while running. The brake is basically useless. What is wrong? Is the brake dirty or loose? I DO believe the brake is the heart of this problem. What do you think?
Talk to the mechanic that worked on it. It's possible that he didn't get the drive belt on properly, and it is somehow causing the brake problem.
My husband used our ride on lawn mower for two days in a row. Then it wouldn't shift out of neutral Does it seem as though the transmission is shot? We were given the mower, it isn't new.
Possible clutch or linkage, so it is not ready for the dump yet.
A buddy had a john deere rider that was doing the same thing. I found the drive belt from engine to tranny was broken was all and the belt on this thing was hidden, so it wasn't a obvious fix.
My riding lawnmower is stuck in first gear. What could be the problem?
By Amie from MO
If you lived in the San Antonio or Bandera Texas area, ProService could help you. If not, check your local Yellow Pages under Small Engine Repair. You should be able to locate someone who can repair your mower for you. Or, check with a local car repair shop, if you can't locate a lawn mower service, and any of their technicians should be able to work on it for you. You have a transmission problem, which is not a 'do it yourself' project for a non-mechanical repair person.
Obvious its a transmission problem but question what could cause the transmission to be stuck in first gear?
We all know where to start to get it fixed
We have been having trouble with the gears on this unit and have been told this is a common fault and not worth repairing; is this correct?
By Tony F
I own a 2010 Troybilt 17.5hp Pony riding mower. I can't shift out of first.
By waynedillon
I was cutting all day with my ride on lawnmower. I stopped and when I started it again and tried to put into gear it will not go into reverse or forward.
By Patrick
I have a Poulan riding lawn mower. Why is it not going into gear?
I think the drive belt is broke or the transmission is bad.
The other gears 1,2, 3, 4, 5 all work
I have a John Deere riding lawnmower it was fine last week when I mowed now I can't get it to move once in gear
I have a Bolens 600 series lawn tractor. I can't get my tractor to switch out of drive. It was working, but now seems to be stuck in drive.
This tractor is old so I have not found any info to help diagnose or fix this yet. Still fishing for info.This could be a problem with your brake disc. They could be rusted and therefore your pads are stuck. You can try spraying WD 40 on the brake disc and rock the tractor back and forth. If this isn't helping, loosen the adjustment on the break disc.
I was driving my Murray riding lawnmower. While mowing I hit the back wheel on something making the tire come off the rim. I had to take the tire off to re-inflate it and after I got it back on and put back together I could still get it to run, but it wouldn't shift at all.
Any ideas on what might have gotten knocked loose or something I need to do differently to make it work again?Maybe the bolt that holds the shifter linkage got damaged or knocked out of place.
I have an older model Poulan 16 horse mower. It has a gear shift handle which will not move at all. I tried to shift it and it's stuck.
I took the handle off and lubed it up and it is just as frozen as before.Try to purge the transaxle.
Instructions are here: www.ifixit.com/
I have a Murray 38 in. manual transmission riding mower and it is missing a piece that changes the gears. Do I have to keep my foot on the clutch the whole time to control how fast it goes?
What part do I need and how do I fix it?I have a 17.5 hp Troybilt riding lawn mower that is only a couple of months old. I started to cut grass today and it would not go into gear. Help!
Dont do anything other than lubricating it or you may void the warranty. Take it back for servicing
Yikes!! Please don't monkey with it and call where you bought it or the company or you will risk voiding your warranty.
The contact info for the company is www.troybilt.com/
It could be a super simple fix, but don't do anything until you hear from the experts or take it back to the store.
Let us know what they say. Be sure to ask about recalls too...just in case!!
I have a Murray 40 inch mower 40507x8c. The shifter is very difficult to move. It will move, but only by applying a lot of force, which I fear will cause further damage. I am thinking low on gear grease or fluid, but I know nothing about them. Can someone help on this? I cannot afford a new transaxle or a new mower, but with my automotive knowledge I should be able to repair it.
Thank you for any responses.