social

Refrigerator's Ice Maker Not Making Ice

June 20, 2018

We moved into a new place in Santa Barbara California. Within days I began getting badly bitten by something invisible at night and I never feel the bites just the itchy huge mounds on my skin.

Advertisement

Help?

Answers


Bronze Feedback Medal for All Time! 196 Feedbacks
June 21, 20180 found this helpful

There is an interesting article about no-see ums in your area:

www.edhat.com/.../mesa-no-see-ums

I wonder if that is what you are experiencing.

You didn't mention if it was only when you were in bed or outside or in a certain room in the house, so it may not be what you are dealing with, but it was interesting.

I am always concerned for people with bites scratching and getting an infection. Be very careful to notice the area and if you get prolonged (a day or two) redness or the site is warm for a day or two, talk to a doctor immediately to make sure it is not an infection.

In this case, safety first with your health and then figure out what is causing it as you proceed! I will step off my healthy you soapbox now :)

 

Bronze Feedback Medal for All Time! 196 Feedbacks
June 21, 20180 found this helpful

I never heard of no see ums when I lived in the South...just growing up in Pittsburgh. When I lived in Northern VA, we had issues with "chiggers" which as a northerner I never heard of...but those bites were always limited to the feet and ankles. I was highly allergic to their bites and got very sick from them. UGH! Bad memories.

Advertisement

That all said, if you are having issues with getting your landlord to help, you could always talk to someone at your state senator's office and see if they can intervene. We have had a lot of luck using our local resources. They are free...at least they are in my state.

I am not sure if this is your exact district, but one of the state senators has a website with tons of resources.

sd19.senate.ca.gov/resources

Good luck!! Take care!!!

 
Read More Answers

January 23, 2007

I have a side by side fridge, with a built-in ice maker. One has to open the freezer to get the ice. Anyway, I get frozen hunks of ice along with the ice cubes that drops into the ice bin. I have to use an ice pick to break up the clumps of ice. What causes this and how can I correct this problem without calling the repair man? Also, It continues to make ice and If I do not remember to lift the arm that stops ice forming it will fall out of the full ice bin and go all over in the freezer.



Thanks in advance,

Mary from Mendenhall, Mississippi

Answers

January 24, 20070 found this helpful

It sounds like your freezer isn't cold enough. It is allowing a tiny bit of melting in the heat of the day and then it freezes everything into blocks when the freezer doesn't have to work so hard to stay cold.

Advertisement

See if adjusting the temp colder by a little bit helps.

 
Answer this Question

March 11, 2008

I bought an ice maker kit from the local Menard's. I hooked it up and it is still not working. The water dispenser inside of the fridge gives out water but I only get 1 or 2 cubes per cycle, if I'm lucky.



Brian from Hamilton, MI

Answers

March 17, 20080 found this helpful

I'd bring it back !

 
Answer this Question

August 10, 2009

My GE ice maker has stopped making ice. There is water in it, its just not freezing.

By Joseph

Answer this Question

April 24, 2010

My White-Westinghouse ice maker does not work. What is the problem?

By Dottie from Huntsville, AL

Answers


Bronze Feedback Medal for All Time! 147 Feedbacks
April 25, 20100 found this helpful

Call the place you got it from, good luck.

 
Answer this Question

May 9, 2011

My ice maker quit making ice. I changed the filter and water came out of the water dispenser but nothing for ice making

By Penny

Answers

July 23, 20110 found this helpful

The water line to the icemaker is probably clogged or even has frozen. Find where it is attached (you can look online for your make or your appliance booklet} and remove the tube, clean, or melt the ice buildup.

 
Answer this Question

May 12, 2012

I have a GE Profile Arctica, Model# PSS25NGMD WW. There is no ice in the bin, I put power to fill solenoid, tray filled and dumped a batch of ice, but does not want to take over and repeat the cycle on its own. To me the bin switch looks in the call for ice position. I need advise and thanks you. Frosty.

By Harland O

Answers

May 14, 20120 found this helpful

Welcome to the world of fixing your own fridge. I saved a lot of $ by doing so. You can download the schematic and manual for your fridge using the model #, then go to PartsPlace.com or an appliance parts website and order the part yourself.

Advertisement

For no ice, it could be a number of things. Youtube even has some good diagnostics! What really clinched it for me was asking a friendly technician that I knew who was able to pinpoint my issue; we ordered the parts from a local place, then drove 13 miles (each way) to pick up the part, installed ourselves.

We saved about $400 by placing parts ourselves on our GE Side by side. I'm sorry I don't have a specific answer for your specific question though.

 
June 26, 20160 found this helpful

I pull a need filter in yesterday afternoon how long does take make ic

 
Answer this Question

July 6, 2012

My ice maker would not make any ice. I replaced the ice maker and still no ice. I have replaced the filter too. I hit the reset button on the fridge side, but I have a red light flashing on the ice maker control switch in the freezer. I have turned it to the "off" position and the red light is still flashing. I have no clue what to check next. What do you think is wrong?

By Glenda

Answers

July 7, 20120 found this helpful

Don't know what it is, however, using the manufacturer and model number, go to the manufacturer site, find the support site, and using the model number search for blinking red light. Or just use the manufacturer, model, and blinking red light in a search engine. Usually the manufacturer has a help line you can call and speak to a technician.

 
July 8, 20120 found this helpful

Biggest question: Do u have a manual for your fridge? If you do, there is usually common troubleshooting near the back. It should also have manufacturer's address and toll free number. If no manual, Try the manufacturer's name with .com added and you might get a website with a forum where other owners could help u. and get a manual you could print out on your computer.

 
Read More Answers

November 21, 2012

The crushed ice works well, but shaved ice delivers faint sound when dispenser is pushed, but no ice?

By NRS

Answer this Question

February 18, 2013

I have a Whirpool Elite refrigerator and freezer on bottom. It's 2 years old. I put in a new water filter and checked the water line. Water is being dispense from the refrigerator. The model #795-71062 010. Before I buy a new ice maker, any suggestions?

By GK

Answers

February 23, 20130 found this helpful

Check to see if an ice cube is jammed in the tray. If so work it out and the Ice Maker will work properly. Mine does this once in a while. Hope this helps.

 
Answer this Question

May 5, 2013

I've seen this question asked many times before, but never paid much attention because it didn't apply to me - now it does! What do I need to check before calling a repairman? Thanks very much!

By caseye

Answers

August 13, 20130 found this helpful

Several have already mentioned but the hair dryer worked wonders for me. My fridge would dispense water but would not fill the ice tray and dispense. I opened the freezer door and pointed the hair dryer to where the ice tray fill line comes in for a few minutes and it worked like a charm.

Advertisement

Later the motor on the ice machine stopped working and using the hair dryer on it thawed it out as well. Haven't had a problem since.

 
Answer this Question

December 29, 2013

Our refrigerator is a Frigidaire and we just replaced the water filter, but now it is not making ice, any clues? It is a Pure Plus water filter. I'm thinking is the filter is on too tight. My husband replaced it, but I cannot turn it that is why I am thinking it might be too tight. Also, when he took it off there was water in filter holder cup.

By Rose D

Answers

Anonymous
February 8, 20160 found this helpful

Had just replaced the water filter, a Pur for a Whirlpool side by side refrigerator, and the ice maker stopped working. Took it out and the ice maker started working without the filter in. Now, on to the next step of letting the ice maker proceed for a few cycles without a filter, then seeing what happens with the new filter reinstalled.

Advertisement

Never had the issue before and have replaced the water filter many, many times over the last 10 years.

 
Answer this Question
<< First< PreviousNext >
In These Pages
Categories
Home and Garden Repair Appliances Ice MachinesJanuary 26, 2013
Pages
More
🎆
Fourth of July Ideas!
🌻
Gardening
👔
Father's Day Ideas!
Facebook
Pinterest
YouTube
Instagram
Categories
Better LivingBudget & FinanceBusiness and LegalComputersConsumer AdviceCoronavirusCraftsEducationEntertainmentFood and RecipesHealth & BeautyHolidays and PartiesHome and GardenMake Your OwnOrganizingParentingPetsPhotosTravel and RecreationWeddings
Published by ThriftyFun.
Desktop Page | View Mobile
Disclaimer | Privacy Policy | Contact Us
Generated 2024-05-21 09:04:42 in 8 secs. ⛅️️
© 1997-2024 by Cumuli, Inc. All Rights Reserved.
https://www.thriftyfun.com/Refrigerator-s-Ice-Maker-Not-Making-Ice.html