We moved into a new place in Santa Barbara California. Within days I began getting badly bitten by something invisible at night and I never feel the bites just the itchy huge mounds on my skin.
There is an interesting article about no-see ums in your area:
www.edhat.com/
I wonder if that is what you are experiencing.
You didn't mention if it was only when you were in bed or outside or in a certain room in the house, so it may not be what you are dealing with, but it was interesting.
I am always concerned for people with bites scratching and getting an infection. Be very careful to notice the area and if you get prolonged (a day or two) redness or the site is warm for a day or two, talk to a doctor immediately to make sure it is not an infection.
In this case, safety first with your health and then figure out what is causing it as you proceed! I will step off my healthy you soapbox now :)
I never heard of no see ums when I lived in the South...just growing up in Pittsburgh. When I lived in Northern VA, we had issues with "chiggers" which as a northerner I never heard of...but those bites were always limited to the feet and ankles. I was highly allergic to their bites and got very sick from them. UGH! Bad memories.
That all said, if you are having issues with getting your landlord to help, you could always talk to someone at your state senator's office and see if they can intervene. We have had a lot of luck using our local resources. They are free...at least they are in my state.
I am not sure if this is your exact district, but one of the state senators has a website with tons of resources.
Good luck!! Take care!!!
It may be bedbugs. see if your bites are three in a row. the bedbug comes out for a blood meal at night and makes three bites. look at your mattress and bedding closely. spritz some water on them and watch for liquified blood. If you don't see any signs of them on the bedding, they may be coming from another place in the room. if your bed has legs put one or more of the legs in a cup of water. put just a dab of dishwashing soap in the water. if they are crawling up the legs of the bed they will drop into the soapy water and be unable to get out.
It may be bedbugs. see if your bites are three in a row. the bedbug comes out for a blood meal at night and makes three bites. look at your mattress and bedding closely. spritz some water on them and watch for liquified blood. If you don't see any signs of them on the bedding, they may be coming from another place in the room. if your bed has legs put one or more of the legs in a cup of water. put just a dab of dishwashing soap in the water. if they are crawling up the legs of the bed they will drop into the soapy water and be unable to get out.
It may be bedbugs. see if your bites are three in a row. the bedbug comes out for a blood meal at night and makes three bites. look at your mattress and bedding closely. spritz some water on them and watch for liquified blood. If you don't see any signs of them on the bedding, they may be coming from another place in the room. if your bed has legs put one or more of the legs in a cup of water. put just a dab of dishwashing soap in the water. if they are crawling up the legs of the bed they will drop into the soapy water and be unable to get out.
I changed the filter on my fridge and now it is not making ice.
By WW
My ice maker is not getting an electrical signal. It does not tell the maker to make ice at the water valve.
By J Maggio from MD
The crushed ice works well, but shaved ice delivers faint sound when dispenser is pushed, but no ice?
By NRS
My GE ice maker has stopped making ice. There is water in it, its just not freezing.
By Joseph
My ice maker hasn't worked in a month. I have put hot boiling pots in to defrost it as that's what my repairman told me to do once when it was whining and groaning. He thought line was frozen. If it was frozen this didn't help the icemaker to start up again. We have water in the dispenser in the door, but no water is running in to the ice tray.
I just turned off the water and took off the dispensing valve out of the fridge to try and see if the line is clear going up to the freezer.
I don't know how to take off the green waterline going up to freezer because it's the new self setting type. I have also changed the filter about two weeks ago before I started any of this. Can anyone tell me what to do?I changed the water filter, but no ice
I have a side by side fridge, with a built-in ice maker. One has to open the freezer to get the ice. Anyway, I get frozen hunks of ice along with the ice cubes that drops into the ice bin. I have to use an ice pick to break up the clumps of ice. What causes this and how can I correct this problem without calling the repair man? Also, It continues to make ice and If I do not remember to lift the arm that stops ice forming it will fall out of the full ice bin and go all over in the freezer.
It sounds like your freezer isn't cold enough. It is allowing a tiny bit of melting in the heat of the day and then it freezes everything into blocks when the freezer doesn't have to work so hard to stay cold.
I have a Whirlpool side by side. My ice maker is no longer producing ice. It looks like the water is being sent to the ice maker, but the water is frozen on the side walls and on the food in the freezer.
How do I repair this?You can consult your owner's manual and request service from a local technician. You can also check the manufacturer's website support for additional information. A very easy online search for Whirlpool support produced many answers. You can try a search yourself or this site to start-read the FAQ section also:
If the filter needs change could that cause the icemaker to stop making ice?
By Pam
Our refrigerator is a Frigidaire and we just replaced the water filter, but now it is not making ice, any clues? It is a Pure Plus water filter. I'm thinking is the filter is on too tight. My husband replaced it, but I cannot turn it that is why I am thinking it might be too tight. Also, when he took it off there was water in filter holder cup.
By Rose D
Had just replaced the water filter, a Pur for a Whirlpool side by side refrigerator, and the ice maker stopped working. Took it out and the ice maker started working without the filter in. Now, on to the next step of letting the ice maker proceed for a few cycles without a filter, then seeing what happens with the new filter reinstalled. Never had the issue before and have replaced the water filter many, many times over the last 10 years.
I've seen this question asked many times before, but never paid much attention because it didn't apply to me - now it does! What do I need to check before calling a repairman? Thanks very much!
By caseye
Several have already mentioned but the hair dryer worked wonders for me. My fridge would dispense water but would not fill the ice tray and dispense. I opened the freezer door and pointed the hair dryer to where the ice tray fill line comes in for a few minutes and it worked like a charm. Later the motor on the ice machine stopped working and using the hair dryer on it thawed it out as well. Haven't had a problem since.
I have a Whirpool Elite refrigerator and freezer on bottom. It's 2 years old. I put in a new water filter and checked the water line. Water is being dispense from the refrigerator. The model #795-71062 010. Before I buy a new ice maker, any suggestions?
By GK
Check to see if an ice cube is jammed in the tray. If so work it out and the Ice Maker will work properly. Mine does this once in a while. Hope this helps.