I have a Frigidaire Gallery fridge. I have changed the water valve, filter, and the ice maker. It made only one round of ice and I can hear it trying to cycle, but no water goes into ice maker.
If you have already changed the necessary pieces for the ice maker and it is not adding water again then there could be a problem with the pump or the water lines being clogged. Normally the pump will pump the water needed and this is a good place to start.
My refrigerator makes ice, but is not dispensing water or ice.
By Mathew
My ice maker is not making ice. No water is filling the ice cube tray, but the water is coming out to fill a glass of water. How do I get water to fill the ice tray maker?
By A. J. Colbert
There is no water coming into the tray for my icemaker, what do I need to do?
By RS
No water is getting to the ice maker in my Frigidaire. The ice maker is mounted inside the freezer. At first there was too much water coming in. It would just overflow. So I changed the water valve because you can blow through both ends and was told that it was bad. I put a new one on. Now I'm getting water to the valve, but not out the side to the ice maker. I tried turning the screw on the front of the machine for more or less water, but nothing worked. No water is coming in. Thanks.
By Dave C
I have tried and tested the water valve and it works. I have poured water in the icemaker and it made ice. I do not know how to take the panel off to fix the problem or if the line could be kinked where it comes in the door. The refrigerator is is one with the freezer on the bottom but has ice in the door.
By Robert
I have Kenmore refrigerator, model #106.57453703. I have problem with the ice maker, first I saw a red led light on top of the bottom for On/Off which is blinking all the time followed by not getting any water in to try of ice maker.
What is the cause of it and which part is broken?Kenmore has a website that provides customer service-you can call the numbers below or check the Kenmore website for more information:
Contact Us
Kenmore Product Questions
1-888-KENMORE (1-888-536-6673)
Retail Customer Care
1-800-549-4505
www.kenmore.com/
i have a 2003 Kenmore side by side fridge. I recently moved and when I connected the fridge, the water freezes in the shute to go into the ice tray. I have defrosted the line and water comes back out, but gets frozen again.
Water no longer comes out of the dispenser as well. What could be the problem?Your water may run colder at your new place. If you put cold water in one ice tray and room temperature water in another ice tray, set them side by side in the freezer, the cold one would start icing over first.
My Samsung ice maker turns, but no water is getting to the ice trays?
By Kacie
Check the water pump, hoses, and if water is flowing to the ice maker. You should be able to disconnect a hose to see if the water inside is frozen or not. You could have the temperature in the freezer set to high and the water is frozen in the hose.
The water line is frozen up at the top of the freezer.
By Don K
I had this happen eons ago. I just repeatedly saturated a washcloth from the hot water tap. and held it to the line. When it cools down, back to the faucet.
My KitchenAid side-by-side refrigerator, model KSCS25I ice maker does not make ice. After changing the water filter, I dumped all of the ice. The ice maker was still functioning and produced more ice. I dumped this ice as well to assure filter residue was eliminated. The ice maker ceased to function at this point. It appears no water is filling the ice trays. A red light located on panel where the ice maker on/off switch is located is blinking. Any suggestions? Is it a faulty switch?
By Ed O. from Cypress, TX
Yes, I do believe it may be a faulty valve/switch. I am having the same problem at this moment and I just checked the lines for calcification and found the line to be clear but no water was entering the ice water line from the switch/valve area. Check here: part for a possible valve solution. www.partselect.com/
Here is the video on installing the part as well :D Good luck!
www.partselect.com/
Our Kenmore with ice maker stops due to ice in the water feed pipe inside the freezer. We remove the ice, get some production then it freezes again. Is there a shut-off valve that may be faulty?
By Bob Watson from Otis, OR
This sounds like a problem due to weak water pressure. If your fridge has a door water dispenser try holding a cup under it and see how fast the water comes out. If it comes out slow or not at all then pull out the fridge, turn off the water supply, unhook the water supply from the fridge and hold the tube into a bucket or large container.
My ice maker is not getting a lot of water. I replaced the water inlet valve today, but still not a lot of water.
There could be a clog in the line.
I have a Kenmore refrigerator and the ice maker is not filling with water.
Try going thru the trouble shoot guide that is the book that came with it. When was the last time you changed the filters?? Once when mine did this it was because the line had frozen. After I turned it off, cleaned it all out and started it up again, it started filling with water. The time I had it off allowed for the frozen water in the tubing to thaw out.
I replaced the ice maker inlet valve and filter housing. I can hear the ice maker cycling, but it does not receive water. I have checked the water pressure from the wall and it runs well.
By Nancy M
Turn off, unplug and let it sit a bit and try it again. Ours does this every once in awhile. I don't know if water is freezing in the line or if it just needs to reset or what.
Clean out the water lines.