social

Harry Potter Paper Pieced Quilt


Bronze Post Medal for All Time! 190 Posts
October 10, 2011

Earlier this year Laurel and I posted a simple paper pieced quilt block.

Here is a link to the original paper pieced block project:
Instructions for Paper Pieced Quilt Block

Advertisement

Despite the delay, it was intended to be the lead in for this project. We had hoped to post this more intricate project shortly thereafter, but life intervened. Finished cauldron block.

 

I had begun searching the internet looking for Harry Potter quilt blocks to make a quilt for my then 9 year old grandson. Well, he is 10 now, but actual progress is being made.

As I was searching I found a wonderful website:
fandominstitches.

I contacted the site developer and designer of many of the blocks featured there, Jennifer Ofenstein, to request permission to post a block project on ThriftyFun based on her Harry Potter series. Being familiar with ThriftyFun, she graciously agreed. The result is a running total of some 30+ blocks. This is one that Laurel pieced - the cauldron.

Advertisement

This particular block consists of two main pieces that are individually pieced and then joined together to complete the block. The finished block will measure 5 1/2 inches (including seam allowances) yielding a 5 inch block after adding sashing or attaching blocks directly. Parts A and B of the cauldron block.

 

Supplies:

Instructions:

  1. Print out your selected pattern. Measure to confirm that it will sew up to the correct size. On some sites you may have to play with the scale.
  2. Advertisement

  3. Set the stitch length on you sewing machine to a small/short stitch, approximately 12-18 stitches per inch, or 1.5 on a machine with a stitch range of 0 - 5. It is recommended that you use a larger needle (90/14). The larger needle and the shorter stitch length will allow you to remove the paper more easily.
  4. Cut the sections of the pattern apart, in this case A and B.

  5. Note: If using a pattern without the seam allowances incorporated into the pattern, remember to cut 1/4 inch outside the entire section. Calderon paper piecing pattern, part B.
     

  6. Starting with either section (A or B) cut a piece of fabric large enough to cover area labeled #1, including a 1/4 inch seam allowance all the way around. We started with the larger section B. Check fitting piece #1.
     

    Advertisement

  7. Place this first piece RIGHT side up on the "unprinted" side of the pattern. You may wish to use either regular Scotch tape, double sided tape, or a glue stick to hold this first piece in place.
  8. Turn the paper over and hold it up to a light. Make sure that the fabric extends beyond the stitching lines.
  9. Now cut a piece of fabric large enough to cover the area of piece #2 including seam allowance. You will use this process when cutting each piece of fabric to add to your square.
  10. Piece #2 lying on #1 right sides together, prior to sewing.
     

  11. Place piece #2 over piece #1, right sides together. Again you can hold the pattern and the two pieces of fabric up to a light source to confirm that the appropriate area is covered. Make sure that you have your #2 (and subsequent pieces) oriented correctly so that they fold back from the seam and cover the correct area of the pattern, with the right side of the fabric facing up.
  12. Advertisement

  13. Now that you are sure of correct placement, turn your pattern over holding the second piece of fabric in place. Sew along the seam line between area #1 and #2.
  14. Sewing piece #2 onto piece #1 along printed stitching line.
     

    Note: Some quilters recommend that you begin and end the stitching inside of the 1/4 inch seam allowance.
    Backstitching does not replace the cross seaming that occurs when your seams extend into the 1/4 inch seam allowance area. This step will help reduce the chance of a gap occurring in the patchwork as subsequent pieces are added.

  15. After adding each new piece of fabric, trim the seam allowance to 1/4 inch. Take care not to cut the paper pattern.
  16. Now open the piece (#2) out from the seam and press flat (on the right side of the fabric) using either a dry iron or specialized boning tool.
  17. Advertisement

  18. Continue this process adding pieces in numerical order.
  19. View of pieces 2 and 3 attached to piece #1
     
    Block with pieces 1 - 4 in place.
     
    Adding pieces 5, 6, and 7.
     
    Continuing to build block, adding pieces 8, 9, and 10.
     

  20. Once section B is finished give it a pressing.
  21. View of part B completed from right side.
     

  22. Now complete each additional section (in this case A) in the same manner. Pressing when done.
  23. Pattern part A of cauldron.
     
    Beginning to build part A, piece #2 sewn onto #1.
     
    Part A with additional pieces added.
     
    Part A completed prior to attaching to part B.
     

  24. Line up the stitching line for joining sections A and B, right sides together. Pin. Stitch. Press.
  25. Carefully trim away the excess fabric along the outside of the 1/4 inch seamline of the foundation paper. DO NOT sew along the outer seamline at this time. You will be piecing the blocks and possible sashing later and taking a 1/4 inch seam at that time as well.
  26. Removing foundation paper after sewing parts A and B together.
     

  27. The foundation paper can be removed at this point or it can be left on the blocks until they have been sewn together. Removing will help reduce the bulk, but leaving it attached adds some stability. You can be the judge based on the fabric being used or personal preference. If the fabric is stretchy you will probably want to leave the paper attached.
  28. Finished cauldron block.
     

    You are now ready to move on to your next block. Enjoy!

We only have about another 30+ to go.

Here is a sample of some of the other completed blocks. Leaky cauldron, crest, and other blocks.

 
Four blocks including mermaid, dementor, etc.
 
Four more blocks including whomping willow, Harry's bed and more.
 

This is another helpful link regarding testing your fabric for colorfastness: Testing Fabric for Colorfastness

By R Barbara from Bremerton and Port Orchard, WA

Read More Comments


Bronze Post Medal for All Time! 190 Posts
February 17, 2015

Back in 2011 I began a longer than intended project of making my grandson a Harry Potter paper pieced quilt. It was finally finished last year, and to his credit he still loved it despite the wait. I have posted a few blocks along the way.

finished quilt

Read More...


Bronze Post Medal for All Time! 190 Posts
March 22, 2013

There is light at the end of my two year long tunnel, regarding the Harry Potter paper pieced quilt I began in the spring of 2011.

Harry Potter quilt in process.

Read More...


Bronze Post Medal for All Time! 190 Posts
September 18, 2012

I finally believe that I am homing in on this project. After months of working on it as time allows I now have 77 blocks with maybe 4-5 to go. Then begins the piecing, including sashing and borders.

Vanishing cabinet and more.

Read More...

February 14, 2012

I just wanted to share the latest batch of paper pieced blocks for the Harry Potter quilt. I am making some progress, in fits and starts. Here are the latest

Five paper pieced quilt blocks.

Read More...
<< First< Previous
In This Page
Categories
Crafts Quilting IdeasSeptember 22, 2016
Pages
More
🐰
Easter Ideas!
🌻
Gardening
👒
Mother's Day Ideas!
Facebook
Pinterest
YouTube
Instagram
Categories
Better LivingBudget & FinanceBusiness and LegalComputersConsumer AdviceCoronavirusCraftsEducationEntertainmentFood and RecipesHealth & BeautyHolidays and PartiesHome and GardenMake Your OwnOrganizingParentingPetsPhotosTravel and RecreationWeddings
Published by ThriftyFun.
Desktop Page | View Mobile
Disclaimer | Privacy Policy | Contact Us
Generated 2024-03-28 02:52:47 in 6 secs. ⛅️️
© 1997-2024 by Cumuli, Inc. All Rights Reserved.
https://www.thriftyfun.com/Harry-Potter-Paper-Pieced-Quilt-1.html