Background: I was frustrated with how frequently I was replacing the incandescent light bulbs in my garage door opener, so I invested in two new IKEA LED bulbs. All of my family members began noticing that their remotes could open the door from down the block, but wouldn't close it unless they were nearly in the garage.
I hope this is helpful. Thank you.
All other remotes work except the wireless keypad for my garage door opener. A new battery was put in, but it still won't work. So it's just the keypad itself?
Open the back of the keypad. You may have a loose or broken wire.
I have 2 separate units for my 2 garage doors. When we both left the house I closed my side with the car homelink (which worked perfectly). My husband closed his with the handheld remote which also worked perfectly. When he returned home before me, he hit his remote and it did not work. He tried the button for my side and that did not work either. Then he tried to get in through both of the keypads and neither one on either side worked.
When I came home my homelink didn't work. What could cause everything to fail at the same time? When we tried to reprogram the keypad on my side it would not work. We tried to reprogram the remote on the one side and it started to open both doors. Then it wouldn't open either door and then it only opened my door. Then it went back to opening both doors simultaneously and then randomly stopped. We never even got to the learn button on the second unit because nothing made any sense. The Homelink in my car won't reprogram and the keypad won't either? What can we do? I have tried to reprogram everything based on the instructions that have always previously worked.
I have contacted the manufacturer when I had similar problems and they walked me through getting everything to work. Good luck.
My garage remotes do not work when the light is on. After the 4.5 minutes and the light goes off it will work! Someone posted to change the bulb because it could be a lead bulb that is flickering! Are they talking about the garage fulorescent lighting with the 2 fluorescent bulbs or are they talking about the 4.5 min light to the garage system? I changed the one in the system, but not in my garage because they are very high up. The opener on the wall works just fine.
This could be caused by a radio interference that the light or the light circuit is causing.
My garage door opener can not be closed or open with either the portable or keypad remotes. The problem is intermittent and it fails most of the time. I have removed the fluorescent light. I also cleaned the control board with electrical cleaning solvent. The direct opener button works fine.
By the way, how do I open the keypad on the keypad remote? I'm able to unscrew the bottom screw to the wall, but the top one requires removing the keypad to access the screw.
Thanks for any advice.
Every time I program my garage door opener it doesn't work for long. It doesn't matter if it's the car's remote or a universal, they never seem to hold.
What's wrong with them or the opener?My Craftsman garage door opener remote quit working. I replaced the batteries and tried to relearn the remote. It says to push button and when it starts blinking to then
Because there is a problem with the circuit board in the remote. It is bad and needs to be replaced. It is better to buy a new unit.
We just bought a new house and not long after we had some electrical storms. That maybe relevant, I don't know. We have 4 Aprimatic TR2 remotes which operate an electric gate on one button and the other button operates a Merlin 430r garage door. The gate still works, but the garage door doesn't on any of the four remotes.
I googled Merlin 430r, etc. and learned that to program my remotes I need to press the "learn" button. Well this I can not find. My 430r does not have the green strip which hides the learn button as indicated on all the 430r's I've looked at even on eBay.
To operate mine manually it has a red switch on the side to press and also a tiny button underneath marked manual control which you also can press. While I've been looking for this "learn" button I found the original Merlin remote which operates the door fine. I'm no electrical wiz and don't want to lose the front gate operation. Please help if you can. Cheers.
By Brad W.
My keyless pad on the outside of the garage wasn't working. I took it off the wall to check on it and now the hand held I keep in the car won't work. What can I do. I do feel like I need a new keyless pad.
By Judy S.
I have 2 doors and two working remotes. I bought a third remote and tried to program it.
It is programmed, but both doors work simultaneously; not separately. What am I doing wrong?
By Dave V
My garage door opener will work from upstairs in the house, but it will not work from outside.
By Joyce B
My remote has seemed at bit slow for the past month or so. I would shake it and it would work. Today it won't work at all. I replaced the battery, but still won't work. It is a Skylink and it came with the home I purchased 5 1/2 years ago.
By Nell D.
We have two openers and two doors. for the past year there are times when neither one will open with the remotes or the keypad. We push the buttons over and over. Sometimes it will eventually open and sometimes it won't. We are thinking some kind of electrical interference but how do we figure it out? The batteries have been changed in everything and reprogrammed.
By Terry D.
My garage door openers keep needing to be paired to the control. The keypad works fine. I replaced the batteries in both remotes. I can pair them and they work for about a week and then I have to pair them again. What could be causing this?
By Lisa
I recently had a garage door replaced. After they left, I found that the remote opener and Homelink on my car stopped working on the garage door next to it. The company says it is nothing to do with the installation. Coincidence? sabotage?
By Mike P from Portland, OR
My Craftsman door remote will not open the garage door from any distance other than 4 feet. The door operates fine with the manual wall switch. It just doesn't work with the remote, if you are farther than 4 feet from it.
By Ken D.
Yes they only work up close same with keyless entry pad
