How do you make bootie purses?
I have been going through clothes like crazy and have found many that do not fit my child yet, are torn or otherwise ruined, so that no one else could get benefit from wearing them.
Does anyone know how to make a lined bootie bag? I have managed to make the outside (jeans portion) but can't figure out how to line it?
Sandy from Lufkin, TX
I haven't made a Bootie Bag, but I found this on the web (starting with step #9 for lining): www.craftster.org/
I made a few of them. I lay the jean bag on a double piece of material, mark the outline of the 'bag', cut and sew the 3 seams. If you want to put a zip in, cut a long strip out of the leg part, about 10 cm wide, cut one end oval shape, pin onto the upper edge of waistband, cut the other end the same shape. Take a zip shorter than the strip, cut slit in middle of strip, insert zip, stitch. Stitch or overlock the strip and innerbag together, fold a small seam, pin and stitch to the waistband.
I would like to have insturctions on how to make a bootie bag. i almost have it but I need more help.
Thanks,
Bonnie from Pittsburgh
Hi Bonnie!!! If you mean a denim purse/bag made from old jeans, here is one site...there are others :)
www.craftbits.com/
Or perhaps you're talking about a house-slipper travel bag? What's your understanding of a bootie bag description? If it's to hold coins or something
This is another site I found: www.craftster.org/
To see what a Bootie bag looks like go to imaginarykingdom.com and click on bootie bag.
I would like to know how to make the bootie bag from jeans that has a flat bottom. My problem is how to make the sides hard that they stand up by themselves. I have tried over and over to make this. Can someome please help me with this?
i make jean purses and to get stiff sides i use plastic canvas......you can usually find it at thrift stores(thats where i have found alot of it) or at craft stores if you dont have anyluck there
I love these! Thanks for the link, Ellen.
Old jeans are just too interesting to throw away or even recyley (to fabric mashers). Yep, I've been using the legs for fun bags, but Boot Bags are just too cool!
As to stiffening and hard bottoms? Balsa wood is light-weight, cheap and easy to use/cut. Plastic 'whalebone' (used in girdles) might be a solution, carboard would work, but only if wrapped in plastic to repel moisture, stiff foam is a good idea, but has anyone seen the new ad for Floam? It might work, too.
In the fabric department you can purchase different "degrees" of interfacing (stiffner). I would cut it to fit the denim and use an iron on fusing material to bond it to the denim. Some of the interfacing even comes already with the fusing on it. This would need to be done before sewing the bottom of the bag together. You could also bond a liner to the interfacing, too, giving you a different fabric inside your bootie bag.
I saw the cutest bags and know I can make them for myself. Just have to figure out how. I guess they are called the bootie bags and yes they are made from denim jeans. These had stiff sides. So where do I get the handles? I don't have a sewing machine co can I do it by hand and if so what will I need? Does anyone have any pictures they can send me of a step by step process so I can see how exactly to do the bottom? Thanks so much
Can anyone give me a site to get free step by step instuctions for making the bootie bag?
I would recommend using the back board for mats when you mat artwork (found in an art supply store or Michael's). It is strong enough and can be covered with fabric using spray mount.
Any suggestions on where to buy the cute beaded handles ~or~ how to make them , like what gauge wire, how to close the loops, etc.... Also where do you buy cheap belts too? Thanks.
lining your bag to stand up on it's own, you must line bag first. then cover panels of very thin wood with same fabric. you will cover three pieces of thin wood for front and back walls.
buy your instructions from diva bootie bags her instructions are great on ebay that is the way I learned how to make them and sell them very nice instructions.
by Elena
For the sides, use foam core - available at most craft stores. It's what's used in real Bootie Bags.
The bottom is covered plywood.
Plain handles are available at craft stores. Make sure that you get beads with holes large enough to go voer the handles. Connect handles to the bag with the seams from the legs that you cut off. Fold them over the handle connectors and staple to the foam core.
P.S. You can do it ALL with a hot glue gun and a staple gun.
I think that everyone that has posted instructions is way off. I have been making them for 7 years and nobodys I have seen look very good. They look cheap and very homemade. I could get you my instructions and you would save alot of money and time. I sell my bags for $150 to $500. They do not look homemade.
Using plywood is wrong, too heavy and if it gets wet the bag will warp.
I would have to email you my instructions with a photo. I would have to send them later, as I have to type them up and then forward them.
If you would just go to Ebay, you can purchase instructions (very easy to follow~Very thorough~with pictures). I purchased the instructions from one person on Ebay and am very sucessful in my purse business! You can find these instructions by using the Search Engine and type BOOTIE BAG...you will see that there are only a couple of ppl offering instructions for these bags..Like I said before..they are very good instructions and very easy to follow!
Good luck with your search..I hope I have helped the ones looking to find the way to make these adorable bags! Have fun!! :o) (Included is a picture of the bag that I made for myself..It is absolutely GORGEOUS!! I made this bag from a pair of Black Wranglers)!!
I use plastic canvas to stiffen my bags. It is lightweight and dries very quickly if it gets wet for the bottom I use 3 pieces on top of each other for strength.
I have used many things when making bags of fabric that need stiffness. I have been known to use whatever I have on hand, instead of running out to buy something. Plastic bottles from my recycle bin can have parts snipped out with multipurpose craft scissors. Also, plastic canvas, cardboard, old file folders. Sometimes long strips cut like stays to reinforce sides, or flat piece placed in the bottom help with shape.