social

Using a Hot Glue Gun

September 25, 2016

Minimizing Damage from Hot Glue Burns While CraftingIf you make a lot of crafts like I do, then you most likely own a hot-glue gun. If so, you are surely familiar with the nasty burns that inevitably come with using one! Hot glue is very painful and continues to burn your skin for several minutes after contact. To minimize the damage, I always keep a bowl of ice-water within easy reach on my work surface. The instant the glue hits my skin, I plunge my finger into the ice water. This stops the burn from causing more damage by curing the glue and instantly cooling the wound. The glue peels off easily and prevents the burn from becoming worse. I never use a hot glue gun without that bowl of ice-water; try it next time you craft- you'll be so glad you did!

Advertisement

Read More Comments

January 7, 2022

If you need some colored hot glue to craft, then you can make it yourself very easily and quickly. You will need transparent hot glue and a colored wax crayon.

The orange colored hot glue.


Diamond Post Medal for All Time! 1,298 Posts
August 9, 2019

I use hot glue frequently for crafts. One of my biggest annoyances is that the hot glue always slips off the table because the cord is too short.

Stop Hot Glue from Slipping Off Table - glue gun attached to an extension cord wrapped around chair back

July 4, 2018

When crafting using a hot glue gun try keeping a bowl of ice water near by to dunk your fingers in if you accidentally get glue on your skin. This is a page about remedies for hot glue gun burns.

Glue gun dripping hot glue onto wood surface.

January 3, 2016

To avoid getting hot glue on your fingers while using a glue gun, put a Bandaid on each of your finger tips before using the hot glue gun. It really helps!

 
Read More...

February 17, 2015

When you're finished using your hot glue gun and there is still glue in the glue stick, what do I do once the gun has cooled down? How do I take this glue stick out and can it be used again if there is some glue left? Does it need throwing away? Thanks.

By Sue

Answers

February 17, 20150 found this helpful

Just leave it in. The next time you heat the gun the glue will melt and you can use it. This won't hurt the glue or the gun.

 
Answer this Question


Gold Post Medal for All Time! 899 Posts
October 15, 2014

Do you use a glue gun when you craft? If you are looking for a way to catch all of the excess glue that oozes from your glue gun, why not use a pretty plate from Goodwill!

blue and white plate with glue gun resting on it

Read More...

September 30, 2012

This is a page about cleaning a glue gun. It is very frustrating to have your glue gun become clogged right in the middle of a project.

Cleaning a Glue Gun


Silver Post Medal for All Time! 297 Posts
November 10, 2010

To remove hot glue cleanly from surfaces: Wait until glue has dried, then get a Q-tip and apply alcohol around the edges of the hot glue. It works quickly and easily.

 
Read More...

September 27, 2010

Get tired of the stringies when using your glue gun? I keep my glue sticks in a plastic shoe box in the freezer. This really reduces the stringies when working on a project.

 
Read More...

February 12, 2008

Can anyone tell me how not to burn myself when using the glue gun? I always stick my finger in to the glue to press down. Thank you!

Marilyn from P. Huron, MI

Answers

February 12, 20080 found this helpful

Keep a bowl of cold water next to you; if you do burn yourself, plunge your finger in immediately. If you need to smooth the glue while it is hot, dip your finger in the water before you touch the glue; and work quickly. The water will insulate you the tiniest bit, and (more importantly) will keep the glue from sticking to you.

Advertisement

If you are pressing down to make sure the items have stuck together, try using a spoon or put a thimble on your finger.

 
By Kay from Houston (Guest Post)
February 12, 20080 found this helpful

Cool glue guns are made now. They're still hot, but not nearly as dangerously hot as the others. They are not expensive and require special cool melt glue sticks. I use a gun often for floral arrangements, and keep a sturdy cut off stem to press things together. any kind of stick or knitting needle etc. would work. I can appreciate your pain. Sometimes my fingertips would get very blistered. Hope this helps.

 

Gold Feedback Medal for All Time! 690 Feedbacks
February 12, 20080 found this helpful

There are pro's&con's to a HOT glue gun.After many raw burnt fingers...I use toothpicks or an orange stick to mash something together..

 
February 12, 20080 found this helpful

I use a special pair of tweezers, and toothpicks or popsicle sticks depending on what im working with. mostly tweezers as i make stuff that is very tiny. :)

 
Read More Answers

July 10, 2007

When working with my hot glue gun, having to lay it down between steps, but needing to leave it on, I rest it facing into a cake pan, with the glue spout inside the pan, the handle on the outside.

 
Read More...

June 1, 2007

When working with small projects and a glue gun, I usually keep a jar of water and some Q-tips on my table. When I need to cool the glue down fast, I just dab the glue with the wet Q-tip.

 
Read More...
<< First< PreviousNext >
In This Page
Categories
Crafts AdviceSeptember 30, 2012
Pages
More
👒
Mother's Day Ideas!
🌻
Gardening
👔
Father's Day Ideas!
Facebook
Pinterest
YouTube
Instagram
Categories
Better LivingBudget & FinanceBusiness and LegalComputersConsumer AdviceCoronavirusCraftsEducationEntertainmentFood and RecipesHealth & BeautyHolidays and PartiesHome and GardenMake Your OwnOrganizingParentingPetsPhotosTravel and RecreationWeddings
Published by ThriftyFun.
Desktop Page | View Mobile
Disclaimer | Privacy Policy | Contact Us
Generated 2024-04-18 10:38:36 in 6 secs. ⛅️️
© 1997-2024 by Cumuli, Inc. All Rights Reserved.
https://www.thriftyfun.com/Glue-Gun-Tips-and-Tricks.html