social

Making a Costume Jewelry Christmas Tree

December 22, 2017

What type of glue do you recommend for the tree or decoration of jewelry on velvet?


Advertisement

Answers


Silver Answer Medal for All Time! 424 Answers
December 22, 20170 found this helpful
Best Answer

I do all kinds of crafts and find that "Gorilla" glue will just about do for any project, go to a craft shop and read the label and this way you will find the one need for what you are doing.

 

Diamond Post Medal for All Time! 1,298 Posts
December 22, 20170 found this helpful
Best Answer

There is Aleene's Super Fabric Adhesive.

 
December 29, 20174 found this helpful
Best Answer

All the glues mentioned above have issues in one way or another. If you are making the tree on a board covered with velvet, then glue a gold chain in the outline of your tree, then fill in the outline with the crackled, broken glass of a green wine bottle (specific instructions on how to do this!) and then will be gluing down the heavy vintage bejeweled rhinestone brooches and such, there are only two glues out there that cut the mustard. One is Beacon 3-in-1 Advanced Craft Glue (crystal clear, instant grab, fast dry.) It is very good if your tree is not going to accumulate a lot of weight by the size of your tree.

Advertisement

But if you are making a larger tree with a heavy frame and crackled glass and jewelry, like I make, then the very best glue that meets all the criteria and will hold forever is E-6000. Only about $2.50 per tube on Amazon and at Walmart stores, elsewhere, they charge $5 -7 per tube. Happy crafting, Ladies! Pam

 
Answer this Question

December 15, 2009

Can I buy a Christmas jewelry tree kit?

By kim from Canada

Answers

December 15, 20091 found this helpful

I have not seen a kit for making the tree, but I am in the process of making one. I bought a green floral cone at the craft store and covered it in dark green velvet from an old pillow. I have been adding sparkly old jewelry, from thrift stores and family, as well as the flat back craft stones.

Advertisement

The base will be a wooden block, sprayed gold, and encrusted with more craft stones. I also bought some of the small clear lights with a battery pack at the Dollar Tree. This will, I hope, be a beautiful heirloom project, with very little expense involved.

 
December 21, 20093 found this helpful

Take a large piece of thin ply board. On the backside, draw a large tree. Drill holes here and there, evenly spaced as you would like them to insert tiny colored lights through. On the front side I glued a large piece of black velvet and make holes where the lights will be placed so they can pop through okay. Where the tree is, glue jewelry: pins, bracelets, pretty buttons, break apart necklaces and bracelets.

Advertisement

Use good glue (I can't remember what kind I used but it has to be effective on the jewelry and fabric). Use bracelets as the trunk and base. Be creative. Find a star to use at the top. When I make mine, I always put something to the outside of the tree like a dragon fly, butterfly, bird or something shiny. I will try to get a picture posted later.

You can take a large frame. Paint it if it isn't pretty.

 
December 21, 20094 found this helpful

Here are some pics of my tree I made about 30 years ago and still use.

 
 
December 21, 20095 found this helpful

More pics

 
 
December 21, 20093 found this helpful

Last one

 
 
Read More Answers

July 27, 2010

How do I make a Christmas tree out of jewelry?

By carol from Bay City, WI

Answers

July 27, 20100 found this helpful

I haven't a clue as to how to make an actual tree structure out of the jewelry. I did however purchase a cheap fake Christmas tree at a craft store and simply strung some necklaces about it and adorned it with earrings ( the ones with the hook backings ), I've kept the tree up just as it is year around and I find it works wonderfully just as a jewelry stand.

Advertisement

:)

 
July 29, 20100 found this helpful

I made two several years ago like the one pictured. It has some special pieces on it like little gingerbread men and some small leaves from the craft store amidst all the beads. These special pieces really made it meaningful to me. The girl scout pin is a great idea, nursing pin or caduceus etc would be neat.

 
August 1, 20100 found this helpful

Momma J,
Where is your picture. Would love to see it.

 
Answer this Question

February 4, 2015

My friend loaned me a magazine with instructions to make a Christmas jewelry tree and pictures. I lent it to a friend who has mislaid it and can't find it. I don't know the name, but it was a few years old. Can you help with the name of the issue? I would like to purchase it if I can.

By Susann S.

Answers


Bronze Answer Medal for All Time! 220 Answers
February 5, 20150 found this helpful

The website below is from a past Thrifty Fun question re a possible jewelry tree:
www.thriftyfun.com/Costume-Jewelry-Christmas-Tree-2...

 

Bronze Answer Medal for All Time! 220 Answers
February 5, 20151 found this helpful

I searched again for more pictures and found a Pinterest page with many completed trees for ideas:
www.pinterest.com/.../

 
Answer this Question

June 23, 2009

My mom has some great vintage costume jewelry from my grandmothers. She wants to make velvet covered Styrofoam Christmas trees with jewels and beads adorning them for gifts for her daughters and granddaughters next Christmas.

Advertisement

How do you make these?

 
Read More...

November 7, 2014

I have collected the costume jewelry, frame. I am ready to organize the jewelry on the black material. How do I make a tree shape? How do I sew on the jewelry? I have many signed pieces and do not want to cut them or glue them onto the fabric. Thanks for your help.

By Lee B.

Read More Answers

October 27, 2012

I am looking for information on making a vintage jewelry Christmas lighted picture frames.

By Rita from Maggie Valley area

Answer this Question

October 20, 2011

Years ago, my grandmother had a lot of junk jewelry around. Using a desired pattern (Christmas tree for example), she painted the frames, covered them with felt, added wood to the back of the frame (so it stood out from the wall), drilled holes through the pattern, and added tiny Christmas lights from the back. The lights were also the reason for it not to hang flush against the wall. Finally she put some type of hanger on back of frame. They look beautiful during the day and even more lovely at night when the lights are turned on.

Does anyone have this pattern or directions for making these? Also do you have other crafts that can be made out of junk jewelry?

By Rita N

Answer this Question

April 12, 2011

I am looking for a Christmas tree wall hanging made of costume jewelry. If any one has one I would appreciate a picture. Thanks.

 
Read More...

July 27, 2010

I am looking for directions on how to make a memory or Christmas tree out of jewelry. It uses one of a kind earrings or old jewelry that is not being used.

 
Read More...

November 10, 2009

I want a pattern to make a cone shaped Christmas tree out of old costume jewelry.

 
Read More...

September 19, 2009

Does anyone have the old pattern for a junk jewelry Christmas Tree Picture wall hanging? You place in picture frame with small lights inserted from back and hang as picture during Christmas.

 
Read More...
<< First< PreviousNext >
In These Pages
Categories
Crafts DecorationsOctober 18, 2012
Pages
More
🌻
Gardening
👒
Mother's Day Ideas!
👔
Father's Day Ideas!
Instagram
Sub-Categories
AdviceBaking TipsBooksBoxing DayBudgetCardsCharitiesChristmas RecipesCleaningCooking TipsCraftsDecoratingDietingGamesGift WrappingGiftsHelpful HintsHosting TipsLinksMiscellaneousMy Frugal HolidayOrganizationParentingPartiesPhotosPlanningSanta TipsShoppingStocking StuffersTraditionsTravel
Published by ThriftyFun.
Desktop Page | View Mobile
Disclaimer | Privacy Policy | Contact Us
Generated 2024-04-27 03:54:25 in 3 secs. ⛅️️
© 1997-2024 by Cumuli, Inc. All Rights Reserved.
https://www.thriftyfun.com/Making-a-Costume-Jewelry-Christmas-Tree.html