Lids cut from food cans using a side-cutting type can opener can be made into charming low-cost unique ornaments for the tree or wall hangings.
Advertisement
Approximate Time: 10-15 minutes
Supplies:
Side-cutting can opener
Christmas fabric with desire motifs
Quilt batting or other padding material
Cool melt glue gun
Metal lids cut using a side-cutting can opener
Felt in matching color
Narrow ribbon in matching color
Pre-gathered lace or other trim to compliment fabric
Instructions:
Remove lids from cans of various sizes using a side-cutting type can opener. Check for sharp edges, and wash lids.
Use the lid as a template to mark the various materials needed. For each ornament, mark:
One motif fabric circle on the back of the fabric. Make sure there is at least a 1/2 inch margin around it. (This piece needs to be cut larger than the lid
Two pieces of thin, or one piece of thick quilt batting
one piece of felt
Cut out the motif fabric at least 1/2 inch larger than the marked line, and cut the rest of the pieces on the marked line.
Advertisement
Place the batting inside the lid rim on the outside of the lid. It can be tacked down with a small dot of glue to keep it in place.
Lay the lid with the batting face-down on the motif fabric, checking to be sure the motif on the fabric is centered on the lid. Use the glue gun and tack down the fabric edges to the back of the lid, pulling the fabric slightly tight, alternating side to side with your glue spots to keep it centered.
Tack down the lace to the back of the ornament. Make sure it is gathered enough to lie flat, and plan on overlapping on a side or bottom of the ornament.
Attach a loop of ribbon for a hanger to the back of the ornament at the top.
Glue the piece of felt to the back all the way around.
Lids cut from food cans using a side-cutting type can opener can be made into charming low-cost unique ornaments for the tree or wall hangings.
