This is the very first project I ever tried using a sewing machine. Like many others, the thought of using a sewing machine was intimidating. After tackling this easy project, I realized that the sewing machine isn't that intimidating. You can go as slow as necessary when sewing the hearts together and you don't need to worry about keeping a perfectly straight line. So if you are like I was and read 'sewing required' and decided it was too hard to try, please keep reading.
Advertisement
Materials needed:
felt in any color you want, I used bright colors
scissors
a sewing machine (please don't let this scare you off)
Cost: As little as $1. A sheet of felt costs .20 cents at most craft stores and you could get as many as 30-50 hearts from sheet, depending on the size you want.
Approximate time: 30 minutes to an hour depending on desired length and how much of a perfectionist you want to be.
Instructions:
Cut heart shapes out of your sheets of felt. You can cut any size that you want. Some of mine are about the size of a nickle for the small size and just under 2 inches for the big size. I cut about 85 hearts.
Once they are cut, organize them in the order you want them to be sewed. Organizing will help streamline the process.
Sew! Bring your organized hearts to the sewing machine. You'll want to a simple straight stitch (not zig zag). Grab your first heart (I found it easiest to start at the center of the top of the heart and work down to the point), put it under the foot and start sewing a few stitches. If you haven't sewed before, you'll want to press down on the pedal a few times to get a few stitches in your heart and then you'll want to reverse the stitch to lock the stitch in so it doesn't unravel (there is usually a button you press on the sewing machine that will let you reverse the stitch). After you lock in your stitch, continue through the first heart, be ready to grab the next color heart in line and start to feed it under the foot so it can be a few stitches behind the first heart.
Advertisement
They do not need to be touching each other, even if there is no material under the foot, the machine will continue to stitch the tread together like a floss until it reaches the next heart. Continue feeding through your hearts until you come to your desired length. You will want to lock in your stitch on the last heart as well, again, this will make sure that the stitches don't unravel.
Find a place to hang your garland. Step back and admire.
In the close up picture, you can see I used white thread and had a few stitches between each heart. Mine are not perfect, but I think that's what gives it a homemade charm.