social

Making Your Own Lampe Berger Fragrances

June 7, 2020

Is it dangerous to use 70% alcohol in recipe for Lampe Berger fuel? I have used 90 in past, but can't find it during covid crisis.


Advertisement

Answers


Bronze Post Medal for All Time! 105 Posts
June 8, 20200 found this helpful
Best Answer

This is the wrong alcohol to use in your recipe. If you'd like to make your own homemade Berger lamp oil recipes then you need to follow the directions carefully. If you don't this can cause issue. Using 70 percent alcohol will cause a lot of smoke and it is not good at all. I would rather buy the oil than to have an issue in my home.

 

Silver Post Medal for All Time! 267 Posts
June 10, 20200 found this helpful
Best Answer

It might be a bit more expensive but check your home improvement stores for 99% isopropyl alcohol. I saw some at Ace Hardware recently in a metal can, like you used to see kerosene in.

Advertisement

I also was able to get some 91% at Walgreens. You might ask your local store when their next shipment comes in and/or if they will save some or let you preorder.

Good luck!

 
Answer this Question

December 25, 2006

Does anyone have a recipe for making the fragrance fuel for a Lampe Berger or one of the other lamp products?

 
Read More...

July 14, 2009

I have fell in love with my Lampe Berger lamp that was given to me as a gift.

 
Read More...

October 12, 2009

Where do you purchase the oils to make my own Lampe Berger Fragrane. I bought some candle oil from a craft store and mixed it up, but is smells like burning alcohol.

 
Read More...

March 24, 2010

I used the recommended amounts, 2 oz. of fragrance oil and 16 oz. of 90 percent alcohol. My stone would not even light. What did I do wrong? Did I use too much oil? Or maybe the wrong oil?

 
Read More...

June 19, 2010

I want to make a scented liquid to fill a Berger lamp. It burns alcohol and scent, but I don't know the percent of alcohol. Do you have any info?

 
Read More...

April 23, 2011

What is the correct amount of scented oil you use for 91% alcohol for a lampe berger? My lamp doesn't get very hot or hardly any scent. I can't afford to buy it already made up!

Thanks.

By Polly Johnson from Klamath Falls, OR

Answers

May 19, 20122 found this helpful

The secret is to use 99% Isopropyl Alcohol (not the same as rubbing alcohol) - available at any Drug Store and inexpensive.

99% Isopropyl Alcohol will get the ceramic top part of the wick to it's right temperature after a minute or two, after which you blow out the flame and the ceramic will remain hot until either snuffed out or the alcohol is used up.

Advertisement

As for adding fragrance, you can either use essential oils (pure natural extracts - usually more expensive) or fragrance oils (synthetic fragrances - usually stronger and much larger fragrance selection and more reasonably priced compared to essential oils.)

How much you use depends on the type of oils you chose to use.
The general rule of thumb I use, is 8 to 10 drops of fragrance or essential oil per 250ml of 99% Isopropyl Alcohol.

Good Luck, have fun and enjoy your Fragrance lamp without breaking the bank.

 
January 4, 20142 found this helpful

As soapmaker, i use Essential oil and fragrance on a daily basis. You can find a lot of great scent for create the lamp mix at place like www.wholesalesuppliesplus.com. I am so happy that I found that website! I was looking for refill for my Berger lamp and the price of the "real stuff" is prohibitive.

Advertisement

I like to use natural product as much as possible and it's now possible to make my Berger lamp spread EO all over the house, yeah me! :)

 
Read More Answers

April 23, 2011

How to make your own lampe Berger scents

 
Read More...

September 14, 2017

How can I make my own oil for my Lampe Berger?


Read More Answers

October 10, 2018

Do I need to use neutral oil between different frangrances?


Read More Answers

December 3, 2018

So after seeing some tutorials on making your own Berger oil fragrances I went out and sourced the following: 91% isopropyl alcohol, fragrance oils, and a new wick.

I mixed approximately 18 drops of fragrance oils into my Berger lamp with about 1/3 of the lamp's capacity filled with isopropyl alcohol and lit it.

It worked very well, great smells and I burnt it for approximately 5 minutes - after blowing it out, the stone goes cold after about 5-10 minutes

When I switch back to the official oil it stays hot so I'm very confused, can someone please shed some light on things to check?

Many thanks in advance.

Read More Answers

February 29, 2020

I'm trying to make my own Lampe Berger fragrance oil. I have the 91% alcohol. What kind of fragrance can I use?


Read More Answers

March 4, 2020

I'm trying to make my homemade oil for my lampe Berger. I got 91% alcohol I tried the fragrances and pure fragrance from Walmart. I tried every different type Walmart has and none of them are strong, I can barely smell them.

I tried tendra. I even used 20 drops and I still can't smell the fragrance. Is there a special kind of oil or place I can buy some from that has a strong smell today? Thanks in advance.

Read More Answers

March 6, 2020

What is the strongest scent I can buy to mix with my 91% alcohol to make my own Lampe Berger oil and where can I buy it? I tried Walmart.

I bought the cheep one. Then I bought the expensive one and it still does not have a smell that is strong enough.

Answers


Bronze Feedback Medal for All Time! 196 Feedbacks
March 6, 20201 found this helpful
Best Answer

My local pharmacy sells really nice essential oils (you have to ask and they are behind the counter. I used to get a peppermint one and it worked great to take a few sniffs right out of the bottle if I felt a headache coming on. That is the only thing I would ever use them for, but that is me.

Advertisement

I always caution people about making home made oil products for burners. I had a fire from one years ago and I just like to remind people that this is really a safety first tool. Thank G-d I caught it before the apartment went up, it had just spread to a drape. VERY SCARY.

While even the store bought ones can be dangerous, the home made versions can be even more so. Just be VERY CAREFUL and never let anything burn unattended.

Thanks for listening!

 
Answer this Question

March 15, 2022

Can you use a few drops of your favourite cologne/perfume in your homemade lampe Berger oil or does it have to be an oil based fragrance/essential oil?


Answers


Gold Feedback Medal for All Time! 949 Feedbacks
March 19, 20220 found this helpful
Best Answer

Making your own oils can save a lot of money but there are precautions that need to be taken every time you light your container as well as when you are making your oils.

Advertisement


Most sites have a long list of instructions so I have found writing down some of the important points gives me a check-list that I can follow and then reread instructions to make sure I have hit all the important points.

I also recommend having more than one wick so you have one soaking in alcohol in a good sealable container - ready for use the next time you light your lamp.
You'll understand what I'm talking about if you watch this YouTube video. I suggest turning on the closed caption (cc) so you can see everything that is discussed.

www.youtube.com/watch?v=Jda9UKJoeoM

Remember; never use rubbing alcohol - only over 90% will work.

 
Answer this Question
<< First< Previous
Categories
Crafts MiscellaneousApril 27, 2016
Pages
More
🎆
Fourth of July Ideas!
👔
Father's Day Ideas!
🌻
Gardening
Facebook
Pinterest
YouTube
Instagram
Categories
Better LivingBudget & FinanceBusiness and LegalComputersConsumer AdviceCoronavirusCraftsEducationEntertainmentFood and RecipesHealth & BeautyHolidays and PartiesHome and GardenMake Your OwnOrganizingParentingPetsPhotosTravel and RecreationWeddings
Published by ThriftyFun.
Desktop Page | View Mobile
Disclaimer | Privacy Policy | Contact Us
Generated 2024-05-30 05:44:34 in 5 secs. ⛅️️
© 1997-2024 by Cumuli, Inc. All Rights Reserved.
https://www.thriftyfun.com/Making-Your-Own-Lampe-Berger-Fragrances.html