August 11, 20120 found this helpful
If your top is veneer, please do not sand your table. You could ruin it completely. Carefully remove the finish on the table top with one of the commercial products offered at the hardware or other stores. DO NOT let it drip on other parts of the table or you will end up having to redo the whole table. Your best advice will come from the store personnel who know "how to" restore your table.
You will have several other steps to this process to return your table to useable condition.
May 8, 20122 found this helpful
I will try to give you info re limited info you supplied. Was the dresser wood? If it was made before 1910 the protective coating would not have been lacquer but either varnish or shellac. Do not use soap and water.
Did the alcohol eat thru the protective coating? Are you seeing a spot where the finish was removed? Use a soft rag like a washcloth - dampen a corner and use a little dab of white toothpaste - not a gel and rub gently. This is one of the mildest abrasives you an use. Do a little at a time to see if it is working.
If the coating has been completely removed and the bare wood is showing you may need to refinish the top. Hope his helps.