social

Swiffer WetJet Isn't Working

June 12, 2015

After trying all of the other suggestions to get my Swiffer Wet Jet working again, i.e.: change batteries, make sure batteries are in properly with the door closed all the way, clean spray openings, clean off battery acid if batteries were corroded, etc., I watched a YouTube video. It said to take acetone based nail polish remover to the battery connectors inside the casing and let dry completely.

Advertisement

Re-install the batteries. This worked for me! I can't believe it was just that after trying everything else! So hopefully this helps you.

Source: https://www.youtube.com/watch?v=5nlpVLRrTWI

 
Read More Comments

April 18, 2018

I followed all of the directions and the bottle came with the WetJet kit. I got it to click in, but it immediately pops back out. Is there any way to fix this?


Answers


Diamond Post Medal for All Time! 1,246 Posts
April 18, 20180 found this helpful
Best Answer

You probably got a bad one. Return it, but also tell Swiffer. 1-866-411-1753

 
Answer this Question

February 14, 2022

My swiffer Wet jet lights come on but motor will not, batteries are fine!


Answers


Bronze Post Medal for All Time! 140 Posts
February 15, 20220 found this helpful
Best Answer

You could check for build up around the hole of the sprayer nozzle. Often cleaner can dry over the cover , making it not functional to use.

Advertisement

Also check placement, to make sure it is fully inserted to reach the power to your mop.

 
Answer this Question

September 21, 2020

My Swiffer WetJet is not working! I just bought it and it appears the jets don't work! I don't see any solution coming out to clean! What can I do?


Answers


Bronze Post Medal for All Time! 105 Posts
September 21, 20200 found this helpful
Best Answer

The solution is not passing through the nozzle and this means that the nozzle is not open so the solution can pass through it when you hit the button. Try using a pin to check the nozzle to make sure it is open so the liquids can pass through.

Advertisement

Also check to make sure you have your batteries installed correctly. This is another reason the sprayer won't work.

 
Answer this Question

March 5, 2017

I just unboxed and put it together, it won't spray the solution. I changed the batteries and tried it before putting the solution back in and the motor seems to work, however when I put the solution in it doesn't clip and will fall out if I try to make the sweeping motion.

I can't seem to get the solution to click into place. I of course can't find the receipt to return it. Any ideas?

Answers


Gold Post Medal for All Time! 677 Posts
March 6, 20170 found this helpful

You can try this:
Take acetone based nail polish remover to the battery connectors inside the casing and let dry completely. Re-install the batteries.

 

Gold Feedback Medal for All Time! 949 Feedbacks
March 6, 20170 found this helpful

I believe that i would try returning it even without a receipt. If you bought it on a debit or credit card maybe you can print out the store receipt where it shows payment and date. Even if there were other things on the receipt the stores can look up that date and find your receipt with item listed. I have done this before with Walmart and they honored it.

Advertisement


I just think you might have even more problems as this could just be a defective item. If that does not work then maybe you could go to the company web site and tell them your story and problem and I feel sure they would help you.
here is their website if you wish to contact them:

swiffer.com/.../contact-us

 
March 18, 20180 found this helpful

There is a button at the base of where the water fits. Press on it when you drop the bottle in. Youll hear it go into place. That button also releases the bottle.

 
Read More Answers

April 10, 2020

I'm trying to open up the battery case because my Swiffer WetJet isn't working, but the battery case won't open. I've taken out the screw and stuff, so I know that that's not the problem.

I'm trying my hardest without being forceful. I don't want to break it. What should I do to open it?

Read More Answers

May 9, 2019

I just received my Swifter Wet Jet through Amazon. It was brand new in the box. I put it together & it's not working. We tried everything, but nothing worked.

Now I am wondering if the handle all the way down has to be put in a certain way for it to work? I hate to return it if maybe I can get it to work. Any ideas?

Answers


Gold Post Medal for All Time! 677 Posts
May 9, 20190 found this helpful

If it is new, return it to Amazon and get a new one.

 
Read More Answers

December 2, 2014

I have put a new bottle of solution in the mop, but nothing will spray out. Suggestions?

By Jane

Answers

December 3, 20140 found this helpful

You can go to ehow website or youtube for tutorials on troubleshooting swiffer wetjets.

 
September 21, 20160 found this helpful

spray comes out of only 1 hole in the pad

 
Read More Answers

July 4, 2019

I have had my Swiffer Wet Jet for 2 months and it is not working. I cleaned the nozzles with a toothbrush and used a toothpick inserted into the nozzles, ran vinegar through it to clean the system, changed the batteries and cleaned the contacts on the batteries.

I have done all of the suggestions and it still doesn't work, it is totally dead. Any suggestions?

Answers


Gold Feedback Medal for All Time! 949 Feedbacks
July 5, 20190 found this helpful

You do not say where you purchased your Swiffer but many stores have a 90 day return policy.
I would suggest you check out the store's return policy (30-60-90 day?) and hopefully it will be 90 days and you can return it to exchange for another or a refund.

Advertisement


Hopefully you have the receipt or maybe paid with a credit/debit card so you have the date of purchase.
If return is not possible then I would also suggest you write to the company and try to get a replacement.

swiffer.com/.../contact-us

Interesting comments..

www.consumeraffairs.com/.../swiffer.html

 
Answer this Question

September 1, 2014

I have a Swiffer Wet Jet CE. The batteries are fine, but when the switch on the handle is pressed the motor does not run to release the spray. Do you have a solution for this? Thank you.

By Richard from Stanardsville, VA

Answers

October 5, 20190 found this helpful

Wet Jet Motor doesn't run!!! I have cleaned the battery contacts with acetone, rubbed them with sand paper, replaced the batteries, cleaned both sprayer holes with a needle and put on a new bottle of cleaner. Still not working!!!

Advertisement

I could have scrubbed the floor on my arthritic knees in the time it took me to do all that!!! I'm very dissatisfied with this product. Additionally, customer service isn't available evenings or weekends!!!

 
Answer this Question

April 17, 2015

My machine is new, it is the first time I'm using it and it is only squirting out of one side. I guess it is clogged.

By Debbie

Answers


Bronze Post Medal for All Time! 105 Posts
November 15, 20170 found this helpful

At times new units might be defective. These types of mops have a guarantee and the store should replace this for you. I'd find my sales receipt and take it back to the market. They will give you a new one.

 
Answer this Question

March 7, 2015

What happens when a sprayer on a Swifter WetJet does not spray and how do you fix it?

By Jok F.

Answer this Question
<< First< PreviousNext >
Categories
Home and Garden Cleaning Cleaning ToolsMay 29, 2013
Pages
More
🌻
Gardening
🐛
Pest Control
👒
Mother's Day Ideas!
Facebook
Pinterest
YouTube
Instagram
Categories
Better LivingBudget & FinanceBusiness and LegalComputersConsumer AdviceCoronavirusCraftsEducationEntertainmentFood and RecipesHealth & BeautyHolidays and PartiesHome and GardenMake Your OwnOrganizingParentingPetsPhotosTravel and RecreationWeddings
Published by ThriftyFun.
Desktop Page | View Mobile
Disclaimer | Privacy Policy | Contact Us
Generated 2024-04-16 04:41:22 in 8 secs. ⛅️️
© 1997-2024 by Cumuli, Inc. All Rights Reserved.
https://www.thriftyfun.com/Swiffer-WetJet-Isnt-Working.html