Use WD-40 to clean gunk off of scissors. It is also great for removing label gunk.
By J Walter B. from Sandusky, OH home of Cedar Point
How do you clean the residue of double stick tape from scissors?
By Caseye
I'd try using rubbing alcohol. It's pretty good at removing "goo." :)
You can buy small can of adhesive remover or cleaner at any hardware or automotive store.
I always keep a can of "Goof Off" in my tool /supply cabinet. It comes in handy for removing adhesive residue and other types of residues.
You can also use vegetable oil (or cooking spray) and rub with a paper towel. Then wash with soap and water and dry well. It will definitely work, and is gentle on finishes.
Nail polish remover or rubbing alcohol will work. Saturate a cotton ball and rub it on the blade.
The best thing for cleaning things like that is good ole WD40 it will not harm the surface and is not toxic in any way. I keep a can in the kitchen and the garage.
Thank you ALL for great suggestions; I'm going to see what I have on hand and try it tonight! Thriftyfun readers are GREAT sources of information and so willing to help - I really appreciate it.
Lighter fluid....it's cheap and it doesn't leave a oily or greasy residue. It doesn't mar the finish like nail polish remover and evaporates quickly. We are a non-smoking household but I have a can of lighter fluid in the bathroom, kitchen, laundryroom and garage. It lifts off those dang labels that are soooo glued on, takes the goo off everything, scuff marks off the floor, tar off your clothes, just a million uses for it. I couldn't live without it.
Crazy as it sounds, I cut double sided tape all the time. I take a piece of the same tape. and "dab/pull" it off. Like removing lint from a sweater. You do have to press "dab" more firmly. The residue will bond with the tape more then stay on your scissor blades. It's a great time saver in between cutting when you don't want to use chemicals, when after a few cuts, your shears will be gunked up again.
Lubricated scissors with petroleum jelly, wiped off, then used a pencil eraser. Worked great!
U can just erase it off with a normal eraser but it will take longer time. Try using white vinegar and rub it in the scissors blade.
How do you remove sticky residue from scissor blades?
By Pat Lafferty from Phoenix, AZ
Try nail polish remover on a cotton ball. Rubbing alcohol is good too. GooGone is a good product as well, and WD-40.
I am with OliveOyl when she recommends Goo Gone. I absolutely love that stuff. You can find it at the Dollar Tree and I load up the tip of a Q-tip(Dollar Tree brand) so as NOT to waste it.
Depends on what it is. Rubbing Alcohol & Fingernail Polish Remover work wonders, but for the stubborn goo, you'll most likely need Goo Gone.
Ditto on the previous suggestions. If you don't have rubbing alcohol sometimes hair spray will work in a pinch. Also sometimes cooking oil (veg, canola, etc) on a cotton ball will work but sometimes takes a little longer.
Peanut butter. An appliance salesmen told me about peanut butter 15 years ago. Rub peanut butter on leave it for a few minutes and them rub off and wash and dry. I but the cheapest I can find in a small jar.
My scissors are sticky from everyday usage (especially cutting adhesive and stickers, etc). You can easily clean your scissors with a little bit of isopropyl alcohol on a cotton oval pad. Wipe the scissor blades down carefully.
White vinegar will not ruin the blades of scissors or rust the metal like water and soap will. Use a cloth soaked in white vinegar to clean scissors instead of water.
After using my heavy shears to cut duct tape, the blades were all sticky with the glue. It suddenly occurred to me that hand sanitizer gel might just cut through the crud if rubbed with a paper towel or old washcloth.
