I recently discovered that with a little water added to plain white craft glue, the same crafts can be made, with the same results instead of using the more expensive Mod Podge as an adhesive/sealant/gloss.
I use Murphy Oil Soap, to clean my paint brushes. I do decoupage, and the brushes get gluey. So I will soak them overnight in the oil soap, and they are clean again.
How can I use decoupage to seal an already framed print so it is waterproof and so I can be used as a tray?
Just apply it in several thin layers. If you don't have it, craft stores carry it in a brush on format and also a spray format. Thick coats should be avoided. You want several thin, even coats. Allow it to dry completely in between coats.
Use Modge Podge for the decoupage part and Krylon sealant to waterproof it.
I would like to know if you have to use Mog Pog or is there a way to decoupage cheaper just for practice?
Marilyn from P.Huron, Mi
I have always used watered down Elmers glueall or school glue. It is SO much cheaper!
You can mix 3 parts white glue to one part water for a modpodgish type finish.
I agree, diluted white glue works great and when you're done decoupaging, could you share a picture of your creation with us?
What I used to do was put some paint thinner in a quart jar, about a third of the jar and then take styrofoam egg cartons or other styrofoam works too (all the same color) and put them in the jar. The paint thinner will melt the styrofoam and the mixture will become thick.
What is the best sealer to use on a piece of paper glued to a piece of wood. I don't want to ruin the pictures I am putting on the wood.
Decoupage is a traditional way to adhere paper to a smooth surface and newspaper clippings are a popular choice. This is a page about decoupaging with newspaper clippings.
For decoupage, use a diluted solution of ordinary white glue to seal in the decorative paper you have applied to your object. It dries to a nice, shiny surface.
I'm doing a project for an art class, and I'd like to use decoupage glue as a way to glue down a bunch of jewelry that I have laid out in a picture frame. If I were to pour the decoupage into the frame in layers, let it dry, and reapply layers until I've covered all the jewerly, would the glue dry clear onto the glass, or look weird from layering?
Currently the image shows the jewelry I have laid out the way I want, with the back cardboard back of the frame removed, and the glass on the bottom.
Years ago there was a product you applied to the front of a thick item to decoupage, then when dried, you could wet and rub off the back, making the item plastic like and thinner to decoupage. Do you know if anything like this is still available? Thanks.
By Joyce G.
I remember using the product you are talking about called "Mod Podge" This is the official site of the product. I loved making stickers out of magazine photos.
Some profess you can take Elmers Glueall and thin with some water and get the same effect. It does work but the coating and dry time may differ. Don't use school glue though. This would work for smaller projects. I liked how you could coat a magazine photo with the mod podge and then when fully dry, dampen the photo on the back and gradually rub off the paper and be left with a nice picture that set flatly in place. I have not used it in years so do some test runs before doing anything permanent.
Another product is called Royal Coat.
How do you decoupage?
By Ann West
Most people buy a product called "Mod Podge" (sold at craft stores) & follow the directions on the container it comes in, but the cheapest way is to use a white glue (like Elmer's) & thin it 50-50 with water & glue then use this as your decoupage medium.
Directions:
Simply cut or tear out your paper (pictures or text) then apply the medium (glue or mod-podge) to the article being decoupaged using a paint brush, next apply the paper or fabric artwork to the wet area then apply another coat to the top of the artwork & let dry. Most people apply 3 or 4 more coats to the top to seal it. Mod Podge comes in Gloss. semi-gloss or Matte, whereas White Glue is kind of a semi-gloss. Have fun!
Do I really have to remove old decoupage before putting on new?
Just sand, paint and decoupage away. If you don't sand it will be "bumpy".
Not necessarily although it does depend on what item you are doing over again and how smooth you want it to look. If you don't want to bother, then just paint a nuetral color over the old decoupage and when dry, do it over again.
I'm new to mod podge with this being my 1st project. I did lots of research and watched videos. My project was to mod podge a photo to wood. It looked easy enough. My problem is it doesn't seem to drying clear like it should.