When I start the washer, it just makes a buzzing sound and does nothing else. Is the motor burned out? My wife was doing a load and when it finished the clothes were still soaking wet and then that is when I tried to start the cycle again and the buzzing sound was there.
By Brent Eskridge from Louisville, KY
I have watched my repairman fix my machine a couple of times, and there are no belts in it. However, there is a small part that connects to the motor that breaks, and then the agitator no longer agitates and the machine does not spin.
My Maytag top loader tries to sense then does not start. It seems like it tries to move but stops.
We bought a front load washer, Whirlpool ghw9150pw1. When we plugged it in all we get is a steady loud beep. Nothing on the panel works?
I have front load washer. My daughter and niece tried to help with laundry which I couldn't be mad about, however we have to use water softener here. They accidentally mixed water softener with fabric softener and it created a nasty mixture of goo.
Now the washer won't do anything. There is no sound; it just starts to blink shortly after turning on. Is there anything I can do to get it running again? Thank you in advance.I have the same problem. Any suggestions of how to fix this.
We recently moved our washer to work on the laundry room. We moved it back and when we tried to start the washer it makes a buzzing sound.
I no longer have the manual and the model number has been rubbed off over the years.I have a Maytag Maxima front loader. We kept on getting error codes for plugged drain so we cleaned out the hoses and took off the front panel and cleaned the lower filter which was pretty nasty. There were kids' socks, toys, and almost $5 in change, but we put it back together and tried to start a load and all it does is beep a few times in a metallic tone then shuts down.
I believe it threw out a code of INT at one point since we put it back together.I have a Samsung front load washing machine. When I turn it on all I get is a humming sound. I can turn it by hand easily. Any help would be appreciated.
Check that all the exterior panels are properly in place. There are safety switches on some panels to prevent the machine from moving when they aren't. If this isn't the problem, turn off the water supply and remove the hoses from the machine.
Google is a great place to look for an answer. We had the same problem. Not a Samsung but regardless. Found the machine humming and wouldn't do anything else. Looked on Google for help. Third try was it. We found our granddaughters sock had some how --- I don't know how slipped through and was stuck in the gears. Easy fix took about 15 mins in all.
I have a Maytag front load washing machine. It recently stopped working. The unit turns on fine, but it will not start.
It doesn't provide any error codes, it just give a 3 tone beep. Any suggestions?The Maytag website customer service can help-online, phone, email:
I have a Maytag Bravo XL, it used to have an SD code displaying. I used Calgon in a few washes and the code is gone.
Now I put clothes in, select cycle, and the panel lights up, but the machine doesn't budge. Any advice please.I have a 300 series Maytag front load washer. I put in clothes, closed the door and pushed the on button. The pause light came on and codes flashed instead of run time.
I cannot open the door and it will not go into any cycle. It has been working fine. Anyone have any answers?I have just bought a brand new washing machine, it is a Maytag. I have plugged it in and it won't turn on at all. What is the problem ?
By Issac
Suggest calling the store where purchased or the manufacturer.
My Maytag washing machine won't power up at all. It happened when the power in my house went off and back on again. Nothing displays on the screen.
By Max
There may be something that needs to be reset like a switch. Do you have a manual? Check it and see what they say under troubleshooting.