To save paper, for drafts or working pages, I print on the backs of previously-printed-on pages. Many of those pages have been 3-hole punched because they were in binders. With my old printers, this worked fine. However, my 15-year-old printers are dying.
A sensor of some sort inside my newer Epson printers doesn't allow printing on 3-hole-punched pages. The page feeds in, the printer pauses, then spits out the page, with an error message ordering me to clear the paper jam.
I hate being outwitted by inanimate objects, and every fiber of my frugal person objects to wasting paper. So, after some thinking, I came up with a work-around.
Using 3M's repositionable Post-it Labeling & Cover-up Tape (covers 6 lines), I cut pieces just large enough to cover each hole. Now those punched pages feed normally through my Epson printers. The pieces must be firmly pressed down to the page (not sure my photo shows this properly).
Of course, it's a bit tedious to remove those small pieces and put them over the holes on the "new" pages. But for occasional and draft printing, it's worth it to me.
I need to know how to print the tips I am interested in instead of printing the whole newsletter.
Marilyn Spradlin
edit copy, edit paste, is the way to put the particualr message in your clipboard. Once th at is done, open wordpad or note pad, then hit edit paste.
Just cut and paste the sections you would like to print to word pad then print from there.
Highlight what you want to save, then go to Edit, Copy, and then you can paste it to a word processing file, and then save. You don't need to print out everything if you save it, and then you can go back and look at the articles at your lesiure.
I am relatively new with the computer and was wondering how do I print a letter with nothing else, but the letter printing out. I am trying to print from my E-Mail. I always get all the info at the top of screen on my letters. Thanks and God bless!
By Debra from Hampton, TN
Copy and paste the email into Microsoft Word document, and then print off a copy.
You highlight the content of the email (holding the right click of your computer mouse), and it will be highlighted in blue. Then push cntrl + p, for print or push the printer icon, and say in the print menu that pops up that you will only print the selection.
My 'highlighting' is accomplished by holding down the left button of the mouse. Once highlighted, release the button and proceed normally to print. When the print menu opens up, put a check mark by 'Selection'. I generally print only the selected portion of any text; this saves wasting ink, and don't forget that you can print on both sides of the paper. I can get four financial transactions [deposit, transfers, etc.] on one piece of paper
MCM has the easiest way, although the rest are good, too. You can also set your printer to grayscale and the rest will just copy in a gray ink. But why waste paper, right?
Sometimes, you can save several emails back and forth on one page, depending on their size. You can also change the size of the font of the email you just copied and pasted, if your emails are long and you want to save paper. You again click and drag, highlighting the words. Then, go up to the size of the text and make it smaller. If your plan is to keep them in word till you might print them, you can do it each time or wait till you are ready to print and do it all at once, clicking and dragging the entire block of emails at once, minimizing the entire multi-page document at once.
When you click and drag to highlight, you can include the senders address too, if that is important.
Hope this helps
PBP
Copy the content, then paste it in a word document then print. If it is for legal purposes, you must print the whole email.
To print only what you want instead of all the ads and links, highlight only what you want to print. Go to File, Print and under print range. . .
