I need to purchase the back of the Ultra Steam Mop H2O. Any ideas about how I can do this?
Thanks.
I have a similar mop and have found it very difficult to find a replacement part. Most "parts" sites are just selling pads and other accessories.
I have found a couple of sites that you may be able to ask where you can find this part you need.
x5mop.com/
www.thanedirect.co.uk/
I do not know the age of your steamer mop but they did have a recall.
Maybe you should check it out - just in case:
My H2O X5 mop is leaking from the small hole at the bottom of the base handle, not from the head. It was dropped accidentally and now leaks.
As you can see by the picture I put blue tack on it.This has been cracked and now the plastic is not strong enough to hold the water in the tube and is now leaking. You can t try to get some really strong glue like epoxy and glue this area to see if you can stop it from leaking.
Pay a visit to your auto parts store as they have all kinds of stuff to stop the strongest leaks.
If not there, go to your nearest Ace or True Value Hardware store and ask them for help as they have all kinds of sealers for plumbing works. Other stores like Home Depot and Lowe's will also have this.
You can also try a plumbing store as this is what they deal with all the time.
The H20 Mop button no longer works. It will not turn off. What can I do to fix it or where can I send in for repairs?
It sounds like there is a connection problem with the switch and one of the cables has come loose. You should take the handle apart and check the wiring on the switch.
If it doesnt turn off one of the wires to the switch is loose or broken. Go to YouTube for videos on how to fix this.
I have had a H2O mop x5 for just over a year and used it successfully several times. Today, however, I filled it with water and switched it on and it tripped the electric.
I tried it later and the same thing happened. Is it a quick fix or should I buy a new one?I am not familiar with this type of mop. Does it heat the water? I'm not sure why it should trip your breaker. Have you tried plugging it in to a different outlet? My first guess is that it is the breaker that is faulty, and that you have a heavier load on that breaker today than you have had in the past.
I have had exactly the same fault (must be built into the design!). I have tried it on several different sockets and it trips the breaker each time. It doesn't come on so I suspect the motor is shorting somewhere. The appliance is not cheap and I haven't used it that much over the year and suspect it's just out of warranty.
My H2O is driving me mad I have had the same thing happen constantly sick of the thing tripping the electric, thrown it away and got myself a new bucket and mop...
I have an H2O mop, Model 808.092; Ref#H2OM-1149-5 date code 0803. The PVC piping (tubing?) at the junction of the base inside the white body between the reservoir and the mophead has cracked under pressure/in use. I want to revive this product. It is worth saving. How can I repair it? Where can I get replacement parts?
You could use acquarium sealant and put duct tape over that.
You mean like the caulk that goes between glass panes of an aquarium? Interesting concept, but, therected is a piece that got lost when it broke.
Do you have a manual?
Is it possible to find a part number?
Your problem kind of sounds like a manufacturing problem..
If so, it is possible the company will repair it.
If you do not have a manual here is a site that has some info and manuals:
www.manualslib.com/
I have also found a couple of sites that you may be able to ask where you can find this part you need.
Nah it will melt because of the metal wire running through. It has to be extra thick heat proof pipe.
My H2O steamer mop's pump is not working; no humming sound. Water scale has been removed. Can the pump be repaired or replace?
Does anyone know the size of the security screwdriver required for an H2O HD steamer mop? Thanks.
Thane H2O X5 steam mop. The tubing inside the unit has split. I need to know the type and size of tubing to be able to replace it.
Thane just tells me I need to buy a replacement mop. Not an option.Am I able to just purchase a lock plug for my H2O steam mop? Mine is missing.
I live in the Hamilton area and have been looking for the Thane H2O Ultra Mop water filtre. Thane Canada says that they don't have this part.
I can't use the machine without one and have no way to unclog it. Does anyone have them or any other suggestions?My H2O Mop Ultra, (red in colour) just stopped working today. There is no power going to the mop, the indicator lights are not coming on. Has anyone any ideas as to what I can do to repair my mop? I am based in the Republic of Ireland. The plug and fuse were checked