I have a 10 year old Poulan 42 inch 17.5 HP riding mower. A local mechanic had just replaced the carburetor and drive belt. When I got the mower back, I noticed it was much more difficult to stop. I had to throttle down (which I never had to do before). Braking gradually got worse.
Now, a month later, I can only stop the mower by pulling out the key. Also, it will only shift gears when off. It will not shift gears while running. The brake is basically useless. What is wrong? Is the brake dirty or loose? I DO believe the brake is the heart of this problem. What do you think?
Talk to the mechanic that worked on it. It's possible that he didn't get the drive belt on properly, and it is somehow causing the brake problem.
I just put a motion belt on a Murray 12/38 model # 38608x92a. Now that the belt is on it still acts as if it's in neutral, on or off. Am I missing a way that the transaxle can be disengaged?
Because even when it's off and in gear it moves as if it's in neutral.There is a problem with the drive chain or the clutch slipping. Check the drive chain and clutch to make sure the gears are locking in place when the motor tries to shift.
I have a Craftsman DYT4000 riding mower. I just replaced the deck and drive belts on my mower. I went to test the mower. I started the mower and pressed the brake pedal and put it in reverse. The mower shifter locked in reverse at this point with the brake pedal pressed I could not shift out of reverse. I let off the brake pedal and started moving in reverse. While moving I was able to shift to neutral or any other gear. At this point if I pressed the brake pedal in I was not able to shift out of that gear, except if I was in neutral to begin with. Any suggestions on a fix would be great.
From reading this, it seems that you need a rod adjustment www.doityourself.com/
I have a John Deere mower (used). I was mowing and did pay attention to how close I was to my stair. Apparently I hit it and now the mower won't shift into gear? Any suggestions as to how or what to do? I am no repair person, but can do some basic stuff or YouTube ideas? Also the brakes suck and I was wondering if they can be tightened or adjusted?
If you hit something, you bent or broke a part. It probably is not a basic fix and will have to be serviced.
I have a 70s Simplicity lawn mower. When it is off I can shift gears, but as soon as I engage the clutch I can move to first, but that's all.
If it is the shifting fork, you will have to disassemble it. There is a forum here: www.justanswer.com/
I have a Murray 40 inch mower 40507x8c. The shifter is very difficult to move. It will move, but only by applying a lot of force, which I fear will cause further damage. I am thinking low on gear grease or fluid, but I know nothing about them. Can someone help on this? I cannot afford a new transaxle or a new mower, but with my automotive knowledge I should be able to repair it.
Thank you for any responses.
Make sure the drive line belt is on properly.
Talk it through with one of their experts:
murray.myfaqcenter.com/
They know their products best and hopefully will get you up and running quickly!! Post back what you learn!
I have a 17.5 hp Troybilt riding lawn mower that is only a couple of months old. I started to cut grass today and it would not go into gear. Help!
Dont do anything other than lubricating it or you may void the warranty. Take it back for servicing
Yikes!! Please don't monkey with it and call where you bought it or the company or you will risk voiding your warranty.
The contact info for the company is www.troybilt.com/
It could be a super simple fix, but don't do anything until you hear from the experts or take it back to the store.
Let us know what they say. Be sure to ask about recalls too...just in case!!
I have a Murray 38 in. manual transmission riding mower and it is missing a piece that changes the gears. Do I have to keep my foot on the clutch the whole time to control how fast it goes?
What part do I need and how do I fix it?I have an older model Poulan 16 horse mower. It has a gear shift handle which will not move at all. I tried to shift it and it's stuck.
I took the handle off and lubed it up and it is just as frozen as before.Try to purge the transaxle.
Instructions are here: www.ifixit.com/
I was driving my Murray riding lawnmower. While mowing I hit the back wheel on something making the tire come off the rim. I had to take the tire off to re-inflate it and after I got it back on and put back together I could still get it to run, but it wouldn't shift at all.
Any ideas on what might have gotten knocked loose or something I need to do differently to make it work again?Maybe the bolt that holds the shifter linkage got damaged or knocked out of place.
I have a Bolens 600 series lawn tractor. I can't get my tractor to switch out of drive. It was working, but now seems to be stuck in drive.
This tractor is old so I have not found any info to help diagnose or fix this yet. Still fishing for info.This could be a problem with your brake disc. They could be rusted and therefore your pads are stuck. You can try spraying WD 40 on the brake disc and rock the tractor back and forth. If this isn't helping, loosen the adjustment on the break disc.