I haven't stored my sheets in my linen closet for years! Every bed has 2 sets of sheets. I fold the sheets as most everyone else seems to do, and fold the pillowcase around it (or you can slip the sheets into the pillowcase). Then I put the extra set between the mattresses of the bed it is for. I either slip them in at the foot of the bed, or the side - whichever is more convenient.
When we had babies in cribs, I folded the crib sheets, put them in a plastic bag, and slipped it between the mattress and springs. This way the sheets are handy and easy to get to when I want to change them, and it frees a tremendous amount of space in my linen closet for other things. This was really helpful when there were 6 of us in the house!
By Judy = Oklahoma from Oklahoma
This tip will save you looking for a matching bottom and top sheet with matching pillowcases. Put folded sheets and one of the pillowcases inside the other pillowcase.
I "try" to keep my linen closet organized using a few tricks. I don't fold my sheets and pillowcases together in sets because I intermingle the top/bottom sheets and pillow cases.
To prevent creases when hanging linens from wire hangers, take a cardboard tube from a used up roll of paper towels and cut lengthwise. Then slip it over the wire hanger and apply tape where you cut the tube.
I place all of sheets together in one of the pillowcases, so the set is together and easy to grab. I store the clean sheets in the closet of the room they are going to be used in.
When bed linens are washed and dried, they are folded as flat sheet, fitted sheet, and pillowcases in layers together. They go in a drawer in whichever room those sheets are used.
I make my linen area look really neat by taking sheet sets and pillowcases and tying them together with inexpensive colorful ribbon. I'm sure this would work with towel sets as well.
I fold the top and bottom sheets in rectangles. Then I wrap them with the folded pillow cases, and a scented dryer sheet between the sheets. I put the complete bundle into a transparent recycled bag.
I organize my sheet sets by folding the sheets and placing them in the matching pillowcase. I also organize my sheet sets by having a shelf for each size; such as the queen size on one shelf, and the twins on another, etc.
After washing and drying your sheets, fold them and the pillowcases neatly and put them in one of the pillowcases and store them in the linen closet.
Keep Bedding Sets Together. When I fold the sheets from the dryer, I always fold the fitted sheet and then I fold the pillowcases together and put both inside the fold of the top sheet.
This tip is helpful for folding your pillow cases. I always take both my pillow cases (seam sides together) and fold BOTH together as you would fold one pillow case.
I like to keep sets together or sheets that I created sets out of by folding them, along with one pillowcase, and putting the entire set into the other pillowcase. This way, you have a neat sheet section in your closet or drawer, and they fit together better too.
Does this tag tell the size of the bedding eg. full, queen, or king? How do you tell the size once the bedding is removed from its packaging?
I use a Sharpie Permanent Marker and write the size on the foot corner of mine. I also mark the left head corner and the right foot corner of the fitted sheet so there's no guessing at how it goes on the bed.
Litter Gitter,
I mark each sheet exactly the same!
I don't know why, but these days tags often do not have the dependable information we are used to! Perhaps it is easier and cheaper to sew the simple required tags on every sheet and then sort the batches and package by size.
I'm sure the reason has something to do with cost & profit!
Lindalou58, that tag definitely says nothing about the sheet size. It gives washing instruction symbols only. I Googled "sheet sizes in inches" and found some helpful websites. The most useful one was Wikipedia. The link is below; just scroll down to the "North American" chart.
Outside of that, you could try the sheets on the beds and see which ones they fit. When you find the match, then write "Twin", "Full", "Queen" or whatever on that tag with a bold Sharpie, or on a corner of the sheet as someone else suggested. The Wikipedia chart gives the range in inches, and you could measure the sheets with a tape measure.
Link: en.wikipedia.org/
Good luck!
we have king and queen beds some sheets are the same color/type, I don't want to find out the size by unfolding and try to put on bed then I have to fold again!! and its impossible to buy sheets at thrift store because it doesn't say size on label. AM I THE ONLY PERSON WITH THIS PROBLEM??? All they have is to identify size on label!!!
I try not to ever fold sheets by washing and drying them and then putting them right back on the bed. Note, that this caused a problem in my first marriage because my husband thought I never changed the sheets.
To keep table linens from creasing, install a rod just beneath a low shelf and hang the linens on hangers padded with paper towel tubes. Fold and store bed or bath linens by sets, not by size.
