I recently got a Canon Typestar 10, but when I turn it on some shapes come up on the LCD for a few seconds then the shapes go away and it won't do anything.
I have a Olivetti CX 440 plus. It types totally incorrect characters. I've checked the daisy wheel integrity and it seems fine.Everything else functions normally.
I was able to correct the wrong character problem once by using some combo of keystrokes, but lost the fix when I cycled the power. Any help?I think you need to reset the daisywheel and then to check the daisy wheel, if it is locked into the carriage correctly.
Examine the keyboard area. If there is any debris it may need to be cleaned.
If you are sure that the daisy wheel is installed properly and it is compatible with standard English keyboard then the problem is in settings. There are settings for a normal standard English keyboard and I think somehow that setting may have been changed.
I plugged in my Smith Corona electric typewriter (color gray and portable) into a 230 volt socket and it needs only 110-120 volts. It turned off suddenly and smells bad, but no smoke came out. It burned. It didn't burn like a burnt piece of wood. Can it still be fixed? If yes, what does it need to have replaced? There are a lot of electricians in my place.
By David from Philippines
Nope. You've fried the circuitry and modules. If you contact the company they may be able to send you new guts. Good luck!
I have a Triumph Adler Gabriele 9009. I haven't used it for about 15 years. I've just plugged it in and turned on the switch and it won't come on. I changed the fuse on the plug, but it still won't come on. I love this typewriter, can anyone help me?
I own an Electronic Typewriter AX-22 and the "Line" light is on but the typewriter has this consistent ticking sound. I can use any of the other keys.
How do I fix the ticking and is it associated with another issue and not the "Line" button?Is this consistent ticking sound the speaker, or is it mechanical?
You'll never find a Service Manual for Brother AX-22 electronic typewriter and if you maybe use an Owner's Manual, it won't cover anything like these problems.
Very often, good cleaning and lubrication solves many problems with typewriters. But it is better for specialists to do it. Your best bet would be to look out for an established typewriter repair center.
But you can take off any easily removed covers, and look for anything out of place. If you can see the power supply, look for evidence of capacitor problems (bulging at the top, split open vent on top, or discoloration of the circuit board from an electrolyte leak, not to be confused with the glue they often put for mechanical support). Power it up, and watch for moving parts. Try to find what's causing the clicking sound. Make sure any sensors you find are clean and don't show signs of corrosion.
Also the printwheel might be somehow damaged, such that a sensor thinks it's in a certain position and it's not or one petal is bent and catching on something.
This Olympia Reporter electric typewriter was working perfectly when last used 25+ years ago. However, when plugging it in now and turning it on, there's a humming noise, but the keys only move up part way (ie.
not far enough to strike the page).
Does anyone have any quick fixes or troubleshooting ideas? It would be a shame to trash it.
My IBM Selectric just started acting odd. Once turned on, and when the carriage return button is pressed, the carriage moves all the way to the left and stays there, and the machine hums. Normal typing is impossible. Turning the machine off is the only "remedy".
What could cause this?
so the carriage return is sticking or freezing. I would look for a typewriter or electronic repairman who would fix it. This may be difficult or even impossible, but worth a try.
The return key on my Olivetti ET Compact 60 is not working. All the other keys appear to work well. The individual back space also works, so the carriage can go to the left side, but not when the return key is pressed.
Any ideas on what may be causing this?I'm not familiar with this model but usually the first thing to check with any key or part that stops working is to make sure your typewriter is clean.
Your machine may not be easy to open up to clean but most likely you will have to investigate because whatever is causing your problem will have to be fixed from underneath/bottom.
"You should look inside the typewriter. As an electric typewriter, the return mechanism will probably consist of a wheel with springs attached to it and a string going from that wheel to the back of the typewriter, maybe the string has snapped or the springs have become loose.
If it's not too difficult to get inside, having a look inside your typewriter is probably a good idea anyway since there might also be belts that have become brittle and could need replacement.
But mainly, you can see how to clean everything.
I have not been able to find a manual but everyone says the manual is no help with anything.
You cannot get help from Olivetti as they have not made typewriters since 2003.
There are some vintage typewriter forums that help with problems so you might need to contact one or more of these ans ask for help. You will have to join but this question will probably get your foot in the door so if you have problems in the future you'll have a place to seek help.
site.xavier.edu/
forums.qrz.com/
typewriter.boardhost.com/
Reddit is a very good site but not quite the same as a regular forum. Join and ask questions if you cannot figure out how to navigate the site.
www.reddit.com/
I have a Brother electric typewriter GX-6750 that I haven't used for a couple of years. It types great, except the letters I type in do not coincide with the letters that come up.
The 3 lines of letters, Q thru M, come out fkiN.nm:MaW;pctsulrbg,hoie. What the heck is happening?Didn't know if I'd find something to help with your problem until locating this easy as pie how to directions from Brother typewriter. Hope this is helpful; if not, I'd recommend calling or sending an email to the company for additional help.
help.brother-usa.com/
It appears that the daisywheel on the typewriter needs to be reset. The best way to do this is to look at the images from Brothers and follow these instructions. help.brother-usa.com/
My typewriter allows me to type, but only half way through the first line of my paper. Any ideas as to why that is and/or how to fix it?
Your tab keys are probably set wrong. Reset the tab keys.
