Does anyone know anything about sewing machines? The bobbin thread isn't being picked up by the needle. I'm not sure what I'm doing wrong, but it was working fine. It is possible, not sure, but the needle doesn't seem to be going down as far as it should. I am mighty confused. Please help.
By shivvers from Ireland
When I have that problem, I have found it works to hold the thread in the needle to the left while you put the needle down to pick up the bobbin thread. Sometimes it is still hard to see if the bobbin thread has come up and when that happens I take a darning needle and run it under the pressure foot and the bobbin thread is there, just needed a little help for me to see it and straighten it out.
If redhatterb's suggestion doesn't work, you might have the bobbin turned the wrong direction. Also, try removing the top thread and rethreading the sewing machine.
Sewing machines can be frustrating. Easy things to try, re-thread the machine and the bobbin. Be sure the bobbin thread is reasonably long (about4 inches). Be sure the needle is threaded from the correct side. Check your settings to see that you have everything on the correct setting. See if you have tightened up the knob or dial or whatever you have that enables you to thread your bobbin; you now have to have it back on the "sew" setting.
Try changing the needle for a new one. I don't know why but this usually works for me.
You may also check to make sure your needle is turned properly. I had this problem not too long ago. I had replaced the needle and tightened it in not realizing I had not set it in the slot properly.
My mini sewing machine's needle is not picking up the bobbin thread. Why?
Make sure the needle is all the way in and that it's tight. Something of note: Schmetz and Klasse needles are different in length. Klasse needles are longer and cannot be used in my Singer. Klasse double needles broke in my Janome.
Good luck
Why is stitching not appearing on my portable mini sewing machine? It's not taking thread from lower bobbin also. Please help me.
Thanks, Actually I have solved this problem on my own, there was a thread sort of issues that's all now it's working very well.
My mini sewing machine doesn't pick up thread from the bobbin and my fabric doesn't get stitched. Please help.
I unscrewed the needle screw and made it very loose so that when I inserted the new needle, it went all the way in. That solved my problem and the bobbin thread engaged!
Could having the wrong bobbin be the problem of the thread not catching?
My machine suddenly stopped sewing. It is not picking up bobbin thread. There are no loops under the material. I have re-threaded it 3 times and have cleaned the bobbin area and rechecked the bobbin. I have also changed needle and thread. No luck.
By Coral from Nudgee, QLD.
Try this. Turn your bobbincase on it's side. There should be a small screw. This will adjust the tension. When you put your bobbin in the bobbin case hang onto the thread and your bobbincase should slowly go downward (like a yo-yo).
I also have the same problem for the first time with my sewing machine Singer model 4423 purchased 3 months ago. As I was sewing the machine suddenly stopped and bent the needle then it stopped sewing. The knob on the right which controls the needle became unmovable. At first I still try to adjust the foot presser (labeled as # 2) but the knob is still tight.
So I was forced to open the machine, now exposing all the metal parts, I thought of applying some machine oil to solve tightness and run it. To my amazement it runs smoothly so I continue adding more oil and the noise was lessened too.
So again I opened the bobbin part, removed the dust and put some oil and run the machine. Try running it but still doesn't sew properly. So I decided to remove the bobbin casing, removed the dust, put some oil and adjusted the metal part (where you hook the thread in place) on the left side. Hurray! It works! Hope this helps...
I am a new owner of a Graybar/Coronado sewing machine model RBR. I think I figured out how to thread it, but I cannot get the top thread to grab the bobbin thread and pull it through.
The bobbin is not a drop in from top it is positioned from the side.I bought a 2nd hand Sewland kids sewing machine at the op shop. It didn't come with a bobbin case. Should it have one? I can't seem to pick up the bobbin thread without one.
I have just bought a used Home Elite Pro. I threaded it like the manual said, but the needle is not pulling up the bobbin thread. I've used a sewing machine once in my life so I'm not experienced. How do I make it work?
By JB
Often it is because the needle is too short. Try a different brand or don't push all the way up when installing the present needle. It will eventually work it's way up though.