My 5-year-old Kenmore refrigerator is dispensing water, but no longer making ice. I have read that I could use my blow dryer to defrost the water fill spout, but I am not sure where it is. Is it on the icemaker itself or on the opening under it that connects it to the freezer or somewhere else in the freezer? Some guidance would be much appreciated.
By Vivian from Falls Church, VA
You may just need to change the filter. This is usually the first sign for us that it is changing time. They run about 45 dollars. The filter is normally located on the bottom of the fridge where the vent is. It is pretty simple to replace, check your manual to be sure.
I changed my filter and ice maker did not work. I read all these posts and did try the blow dryer trick but then noticed my receptacle that holds the water where it freezes the cubes was not filled so I took a little water and started pouring it down the white spout and as soon as some water reached the compartment that holds the water the water started coming out in the normal manner and arm started moving, was I surprised!
Use your blow dryer on your fill cup. Sometimes, the fill cup will get frozen up with water. Once you melt the ice in the fill cup; should work fine. Give freezer time to get cold before new ice starts.High Humidity was my cause for build up.
I was just wondering if a regular Kenmore refrigerator with an inside half moon shaped ice cube maker can be converted to make crushed ice instead of what it does now? Thanks!
I believe this would be a technical job and maybe you should ask service techs who do repairs and such.
Before you can ask questions you will need your complete model number or no one will be able to help you
There are a lot of appliance forums online because these are popular DIY repairs.
You will have to join before posting and also provide model number and maybe a picture.
www.appliance411.com/
appliancerepairforum.com/
www.applianceblog.com/
I have Kenmore refrigerator model number 253.70319211, with French doors. The ice maker is in refrigerator and makes ice great except the ice clumps in tray. There are no visible leaks. It seems to clump in the center of the bin.
Could this be a defrost terminator (thermostat) issue? I tried adjusting template up and down. No change. I replaced the water valve in back of the unit. No change; it was still clumping ice. Any suggestions?You are correct when you say it is a temp problem in the ice tray. It appears that the ice is starting to melt then freezes up again which is causing it to clump like it does.
This sounds liike a warning to me that maybe the freezer isn't working as well as it ought.
This is worrisome in case you have meat, seafood, or other highly perishable items in there; you do not want those things to defrost and refrost, ever.
Is there a way you can make sure the rest of the freezer is not doing that? Did you check the seals around the door?
I have a Kenmore model #106.57368700. The ice maker was leaking and causing big a chunk to form in the ice bin. We replaced the water inlet valve, but that did not work so we replaced the ice maker. Now the water will not shut off. Any idea what need to do I need to do to fix it?
Thanks.
I have a 7-year old Kenmore Elite side-by-side refrigerator 795.5137. Ice is being made, the ice maker auger turns, but the flap does not open.
The flap motor was not running so I replaced it, but the new one isn't running either. Any thoughts?Since changing the filter the ice maker isn't making ice regularly. It is very slow and makes just a few cubes a day.
Like I said it has a new filter and the water seems to dispense fine. It is just slow in making ice.The thermostat in the ice maker may be defective.
worked fine on old filter? Filter may be defective, or you bumped the settings on the ice maker.
My Kenmore ice maker is getting too much water. This ice maker was working fine then it started freezing up and now it getting too much water. Suggestions please?
Try replacing the water valve. If that doesnt work, the ice maker itself has to be replaced.
Depending on the model, the gear in your ice maker may be adjustable.
Reference:
forum.appliancepartspros.com/
If your ice maker has stopped dropping ice, it may just be stuck and need some minor repair. This is a page about Kenmore Elite icemaker not dumping ice.
If there are plastic bits mixed with the ice in a Kenmore refrigerator's ice maker, there is likely a gear or motor that needs to be adjusted or replaced. It should be easy to tell which with some general troubleshooting.