Repairing a Mobile Home

Marty Dick
Bronze Post Medal for All Time! 169 Posts

October 28, 20070 found this helpful

Would it be feasible to remove the doors which don't fit right? You see a lot of open cabinets on the shows on HGTV. Do you have a handy nephew or grandson who might come over and take them down and put them back so they will fit? As for the rooster decor you might want to incorporate some philodendron in rooster pots or even an indoor herb garden.

I think it might be cute to find some fabric with a rooster pattern or the right colors and make curtains instead of the doors that don't square up.

You can cover a lot of things with inexpensive contact paper and cut out roosters and place them on the walls cabinets etc. Also since the kitchens tend to be small three boxes of self stick tile would work great.

I alive in a mobile home in NC and I redid my kitchen. I painted all my cabinets white, and used black hardware that I had repainted from their original brass finish. I found, too, that some of the cabinet doors did not fit right when returned to their place. My husband adjusted the hinges a little and it worked.

For the floor, you may want to consider the stick down linoleum tiles. They have come a long way in the past few years and can be applied right over the existing floor.

I agree with the previous post that you might be able to take off some of the doors to your cupboards. As she mentioned that is very stylish now. Also, I have had good luck with trading doors from one cupboard to another. So you might try that. Another idea I had was to hang a piece of pretty cloth to cover the opening of the cupboard that doesnt have a door. This is used in country style decorating which you already have implemented with your rooster theme.

YOu can use sheets or other fabric to cover panelling if you like. You dip it in starch and hang it like wallpaper. Of course, the ridges will show anyway unless you are able to fill them.

I recently fixed up my kitchen in my mobile home in Ocean Isle, NC and this is what I did. My walls are painted a light brown (paint is the cheapest decorating tool). I painted all my cabinets white (I had to prime first) and then took all my brass hardware and painted it black. My floors are a vinyl (but look like tiles) that I got as a remnant at Lowe's, and they are in a light brown/darker brown swirl. I collect strawberry items and my curtains have strawberries but there is a brown in the baskets that some of the berries are in.

Lynda

October 30, 20070 found this helpful

MartyD's idea of open cabinets would be a great idea! Just take off the door hardware and fill the holes with wood putty. To stick with the rooster motif, get some wallpaper border with roosters on it and let your imagination run wild! Double faced tape and a pair of scissors would be the weapons of choice for that project. We spend a lot of time in our kitchens... We should be happy with them!

Hi. I read your post and when I was at an auction the other night, bought some foam adhesive on a a roll. I thought this would really fit the bill on this problem. So if you still have the problem, go to the local hardware or walmart and ask for foam on a roll. What makes this so good is it has tape on it already and when the cabinets close there will be no gaps.

I so appreciate all these ideas. Many thanks. Wondering how adhesive/foam on a roll could be used as suggested by denise w. Can anyone explain this to me?

Linda

January 14, 20081 found this helpful

I am posting two feedbacks so I can post two pictures. The kitchen in my son's house was the worst I'd seen in a long time. The cabinets doors were old, chipped and outdated and had missing doors. The counter tops were scarred and sections of the turquoise laminate had come loose and fallen off, probably back in the 70's. After a couple years, I asked my daughter-in-law if I could update her kitchen.

I went to Lowes (the only home improvement store in my small lake resort town in Texas) to get supplies. I found ceramic mosaic tile, and because random pieces were broken, I bought 12"x12" tile for the counter tops for $1 each. Then we cut out all chipped tiles and replaced them with unbroken pieces from "donor" tiles. I tiled right over the old laminate countertop. First, I clean with TSP, score and scratch the laminate to give the adhesive more tooth. I have tiled numerous countertops using this method and have never had a single tile come loose.

For the cabinets, we painted the frames and doors. Then I bought two rolls of thick, prepasted wallpaper that looked like bead board and we pasted it onto the door and drawer fronts and even pasted it onto the interiors of the cabinets so they would also look clean and fresh. I used a clear wallpaper paste for good adhesion and very sharp razor blades for clean cuts. This wallpaper is thick and highly scrubbable. I even tested it by using scouring powder on the surface and it wasn't damaged.

I used inexpensive white vinyl floor tiles to make the shelves of the upper cabinets look clean and new. Upper cabinets are 12" deep, so very little cutting was necessary.
You just peel off the paper and stick them down onto the old wood surface.

I then found door and drawer pulls on closeout for 43 cents each. For the backsplash I bought inexpensive tile to mix with the mosaic because I didn't have enough of the countertop tiles to do the entire project.

Myrna
Bronze Feedback Medal for All Time! 168 Feedbacks

January 10, 20080 found this helpful

Styrofoam crown molding is easily cracked or broken and dented. I'd try some other type before replacing old molding with the same stuff even if it means only being able to do a room or two until later.

Lorilie is correct about it denting/breaking...BUT we remodeled our single wide home with it and have had good luck. If you have small children or animals it might damage easy. We have teenagers and cats and haven't had problems. Just make sure if you use it you secure it well to the wall and cut the joints correctly for a good fit. We have used it around doorways, chair rail, and baseboards.

Good luck

Try going to a supply store specifically for Mobile Homes. If you live in an area where mobile homes are common, there should be at least one store in your vicinity. They can advise you as to the best materials to use and what will stand up and what won't. If what they sell is too pricey for you, go either to a home style store (i.e. Lowes) or do a search online for companies that sell the products you will need.